DIGITAL TERRESTRIAL TV RECEIVER ITD 58 - ITD 59 - ITD 60 ITD 61 - ITD 62 - ITD 64 ITD 68* - ITD 72* *Top Up TV compatible USER MANUAL ENGLISH
QUICK START CONGRATULATIONS! This new generation of Set Top Box gives you access to new digital services and makes it easy for you and your family to choose the very best experiences of Digital TV. Once you have connected your Set Top Box and adjusted it according to your preference, you can enjoy all the services. You can update your Set Top Box through the antenna stream as new functions and services become available. Sagem set top box operates a policy of continuous development.
QUICK START Connection diagram ITD 60 and TV without scart ITD 58/59/60/68 and TV with scart On ITD 58/59, only analog channels can be recorded.
QUICK START Installation Guide Getting Started Unpack your Sagem Communication digital receiver and check for the following accessories : User Manual, remote control, batteries and power cable. Disconnect power to all your existing equipment. Locate product in preferred position. Connect all equipment as shown in the diagram on the adjacent page. Finally, once all other connections are made, connect power and switch on your television set. Setting up your Set Top Box Switch on your Set Top Box.
CONTENTS QUICK START ............................................................................................... I 1. GENERAL INFORMATION ....................................................................... 1 1-1. SAFETY ........................................................................................................ 1 1-2. PACKING LIST ............................................................................................. 1 1-3. CONNECTION TO THE MAINS SUPPLY ...........................
CONTENTS 6. USER SETTINGS .................................................................................... 11 6-1. LANGUAGE SETTING ............................................................................... 11 6-2. USER PREFERENCES .............................................................................. 11 6-3. FAVOURITE LISTS INSTALLATION (not available on ITD 58/59/60/68) .. 12 6-3-1. CREATION ..................................................................................................
1. GENERAL INFORMATION 1-1 SAFETY Use of your Set Top Box is subject to safety measures designed to protect users and their environment. In order to keep the high performance of your Set Top Box, it should: • be located in an indoor place to protect it from lightning, rain and direct sunlight, • be located in a dry and well-ventilated place, • be protected from damp, be installed in a way to avoid violent shocks, • be plugged directly into the mains with the cords provided with the Set Top Box.
2. GENERAL DESCRIPTION 2-1 FRONT PANEL DESCRIPTION Green/Red IR sensor Red LED Stand-by mode. Green LED Reception of commands from remote control. 2-2 REAR PANEL DESCRIPTION A B C D E F A – Connector for external AC/DC adapter B – Scart socket for VCR/AUX connection (*) C – Scart socket for TV set connection D – mini jack 3.
2.
3. CONNECTIONS 3-1 INTRODUCTION There are several ways of connecting the Set Top Box to your audio/TV system. Some of the methods enable you to listen to music in stereo sound of CD like quality (ITD 64 only). Consult your local supplier for assistance in setting up an audio/video configuration best suited to your unique requirements. Warning: Disconnect the Set Top Box from the mains before connecting or disconnecting any device to it.
4. FIRST TIME INSTALLATION 4-1 GENERAL INFORMATION Once you have correctly connected the Set Top Box, you also have to perform a “First time installation”. During this procedure, helpful information is displayed at the bottom of the menus. Please note! The button always confirms a selection within these menus, and pressing it will take you to the next step in the installation process. However, and this is important, often more than one value has to be entered in a menu.
4. FIRST TIME INSTALLATION 4-4 COUNTRY • Select the desired country with cursors . This will also set the current time. • Press and to continue. 4-5 CHANNEL SEARCH IN PROGRESS This menu will be shown as the Set Top Box is searching for TV and radio channels. Please note that the search procedure may take a few minutes. You can cancel the search at any time by pressing EXIT. When the search procedure has ended, a message will indicate how many TV and radio channels have been found.
5. BOX ADVANCED SETTINGS Go to MENU/INSTALLATION/BOX SETTING/CHANNEL SEARCH. 5-1 PRELIMINARY/ INSTALLATION CODE Your Set Top Box is supplied ready to use for a standard configuration. TV : 4/3 format, RGB (Letterbox) VCR : PAL (none on ITD 58/59/60/68) Access to the installation screens shown below will enable you to adapt your Set Top Box to your favourite equipment. The access to main menu is obtained by pressing the MENU key. You can memorise your selections by pressing the key.
5. BOX ADVANCED SETTINGS 5-2 CHANNEL SEARCH: AUTO TUNE This installation will complete list "All services" with all the channels found during the scanning of all the frequencies. This list is a summary of all the channels and will not be modified. It will be possible to create personal lists based on this reference list, also called list "All services" (see page 12). It would be advisable to launch a channel search monthly in order to keep your Set Top Box up todate. Press to start channel tuning.
5. BOX ADVANCED SETTINGS 5-3 AUDIO/VIDEO INSTALLATION Use cursor line and press to move down to the TV AND VCR SETTING to confirm. 5-3-1 TV Several choices are available. Scroll through the choices using cursors or : • TV format : 4/3 (Letterbox or Pan-scan) or 16/9. • TV RGB Output: low,medium, high or none if you want to have PAL video output (*). (*) Note that if you choose low, medium or high you will not able to choose the VCR standard format.
5. BOX ADVANCED SETTINGS 5-3-3 Modulator (Only ITD60) If you want to adjust the channel for another TV set: • directly access the menu, • choose the channel (21 to 69) by entering the number, • choose the standard of your country (B/G, I or K). The channel is factory set to 38. 5-3-4 Digital output (Only ITD64) Several choices are available. Scroll through the choices using cursors or : • Home cinema: Send AC3 audio data to the digital output when available (*).
6. USER SETTINGS 6-1 LANGUAGE SETTING Go to main MENU/INSTALLATION/USER SETTINGS Press for access to various configurations. Select LANGUAGE SETTING and press to confirm. • MENU LANGUAGE You may select the menu displayed languages. • MAIN AND ALTERNATIVE AUDIO LANGUAGES If more than one audio language is transmitted, you may select the main and the alternative languages. • MAIN AND ALTERNATIVE SUBTITLES If more than one subtitle is transmitted, you may select the main and the alternative subtitles.
6. USER SETTINGS 6-3 FAVOURITE LISTS INSTALLATION (not available on ITD 58/59/60/68) To go main MENU/INSTALLATION/USER SETTINGS/FAVOURITE LISTS This function will enable you to make up a FAVOURITE list of the TV or radio type from the reference list All Services. 6-3-1 CREATION Two lists are displayed simultaneously. • The list on the left side is the reference list (issued scanning installation). • The list on the right side is the list under construction.
6. USER SETTINGS 6-4 LOCKING (not available on ITD 58/59/60/68) To go main MENU/INSTALLATION/USER SETTINGS/LOCKING 3 types of locking are provided: • Select Box Locked (yes/no) for general locking. This represents the highest Set Top Box locking level. You will be prompted to enter your code each time you switch on your Set Top Box. Note: this locking will be activated after one standby/on cycle. • Select Lock Channels (yes/no) for locking activation.
6. USER SETTINGS 6-5 CHANGING INSTALLATION CODE To go main MENU/INSTALLATION/USER SETTINGS/CHANGING INSTALLATION CODE Enter your new code. As soon as the value has been entered, the segment is replaced with a star. Use cursor on the remote control unit to come back to a value that has been entered and modify it. In this case, the value becomes a blinking segment again, indicating that entry is possible. Enter the same new code to confirm it. "CORRECT" appears, the code is validated automatically.
7. USING YOUR SET TOP BOX 7-1 CHANNEL CHANGE • Using the keys and , or keys 0-9 Press the keys and to change channel or enter its number on numeric keypad of the remote control unit to access the desired channel directly. It is possible to go back to the previous channel viewed by pressing the BACK key. • Using the channel list Press the OK key to display the channel list, select your channel, press OK key again to validate.
7. USING YOUR SET TOP BOX 7-3 EXTENDED PROGRAM INFORMATION The Set Top Box can display information about programs currently being broadcasted as well as those that will be broadcasted next. By pressing INFO while watching TV, you will get the “Program information” banner. A - Program information (see page 15) B - Short summary C - Next program If necessary, use page. D key to continue reading on the next info If the icon is displayed (see D), an extended summary is available.
7. USING YOUR SET TOP BOX 7-4 TV CHANNELS LIST • When viewing TV programs, press current channels list. • Move with cursors channel with . , , to display the and select You can Change favourite lists with key. • Without displaying TV list, you can directly Change favourite lists by pressing key. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 TWC 4 - EURO. TWC 5 - FRANC. MTV N-TV RTL RTL2 SAT.1 BLOOMBERG TV DTRAVELO YiH CNN INT.
7. USING YOUR SET TOP BOX 7-6 VOLUME ADJUSTMENT To increase or reduce the volume, use cursor To turn off the sound quickly, press the Press the or . mute key. mute key again to restore the sound. The audio volume cannot be adjusted in the VCR and TV modes. 7-7 TV MODE With the button, you can toggle between external connected equipment, such as e.g. a digital terrestrial TV or a video recorder (the video must be switched on).
7. USING YOUR SET TOP BOX 7-9-2 Events timer You can make the Set Top Box start and stop at a predefined time. The timer function is very useful when you want to record a program and you are unable to start/stop the recording event yourself, or when you just want to be reminded of the start of a program you do not want to miss.
7. USING YOUR SET TOP BOX 7-10 ENHANCED PROGRAM GUIDE (not available on ITD 58/60/68) To display more detailed information about a selected program, press the key . To remove this information, press EXIT key. A - Resized video is displayed. The video displayed is the current channel’s one before entering the EPG. B - Channels list of the current list is displayed. Select the chosen channel with and and see the associated resized video by pressing .
7. USING YOUR SET TOP BOX 7-12 RADIO MODE Press the Box. key on the remote control unit of the Set Top You can move through the list displayed using . You can adjust the volume with and and . 7-13 SET TOP BOX ENHANCEMENT The Set Top Box goes in this state when a new version of software is available on the network after startup. • Red led flashes. • The Welcome screen is displayed. Then a screen for “download process” request is displayed. You can delay the downloading process by pressing the EXIT key.
7. USING YOUR SET TOP BOX 7-14 TROUBLESHOOTING Error Code Origin of Error User Action 1, 2 or 3 flashes Reception error Acknowledge the message by pressing any key on the remote control. If necessary, repeat your request. 4, 5 or 6 flashes Flow validity errors Acknowledge the message by pressing any key on the remote control. If necessary, repeat your request. 7 or 8 flashes Local errors Acknowledge the message by pressing any key on the remote control. If necessary, repeat your request.
7. USING YOUR SET TOP BOX 7-15 OUTLINE SPECIFICATIONS Tranmission standards Video Decoder Front Panel DVB-T, MPEG 2, COFDM MPEG-2 (ISO/IEC 13818-2) Profile level: MP@ ML Input rates: 1.
7. USING YOUR SET TOP BOX 7-16 GUARANTEE (TERMS AND CONDITIONS) ATTENTION In order to apply the guarantee, you should contact your dealer or Sagem Communication helpdesk at 0905 77 48 081 (0.15 £/min, tariff cost effective form 27/06/2005). Proof of purchase will be required. Should any malfunctioning arise, the dealer or Sagem Communication helpdesk will advise you what to do.
8. ENVIRONMENT Preservation of the environment is an essential concern of Sagem Communication. The desire of Sagem Communication to operate systems observing the environment and consequently it has decided to integrate environmental performances in the life cycle of its products, from manufacturing to commissioning, use and elimination.
User Guide Data subject to change without notice *252220355A* SAGEM COMMUNICATION Société anonyme au capital de 300 272 000 € - 480 108 158 RCS PARIS 27, rue Leblanc - 75512 PARIS CEDEX 15 - FRANCE www.sagem.
