User manual

1-16

Installation

Remark : always get hold of the paper tray with both hands when removing it or putting it back into the additional paper

unit.

INSTALLING THE DUPLEX-UNIT

(DEPENDING ON MODEL OR OPTION)

After installation and connection, the duplex-unit will enable you to print, receive faxes or to receive

local photocopies in mode.

 Switch off your terminal and pull out the mains plug.

 Take the duplex unit out of its box and remove the protective film.

 Remove the connector cover (C) to obtain access to the connector.

 Clip the connector of the flat cable (E) of the duplex unit in the connector (D) located at the

bottom left hand side of the terminal.