User manual

3-10
Setting your machine
Access to servers parameters
922 OK - INTERNET / INIT. PROVIDER / SERVERS
 Enter SMTP, press OK.
 Enter POP3, press OK.
 Enter DNS 1 (primary), press OK.
Access to the authentification SMTP parameters
923 OK - INTERNET / INIT. PROVIDER / SMTPAUTHENT.
In the ACTIVATION menu, select WITH to activate SMTP authentification then validate with OK
key.
In the PARAMETERS menu, select ID.MESS.SERV to keep the same identification parameters as
in the messaging service or AUTHENT. SPEC. to define other identification parameters, then
validate with Access to SMTP authentification parameters by pressing OK key. When you select
AUTHENT. SPEC, carry out the two following operations
 Enter the IDENTIFIER then validate with OK key.
 Enter the PASSWORD then validate with OK key.
Sample Local Network settings for the terminal
Your access provider should give you the following information:
Non-functional data given by way of example.
EMAIL IDENTIFIER : demo jt12
EMAIL PASSWORD : *****
EMAIL ADRESS : [e-mail]
SERVER :
SMTP mail.company.com
POP mail.company.com
DNS 1 103.195.014.001
DNS 2 103.195.014.002