User manual

6-8
Maintenance
 Insert chip card (supplied with the toner cartridge) into the card reader ensuring that the chip is
entered as shown in the drawing below.
 The following is displayed on the scanner control panel screen:
 Press OK.
 Once the chip card has been read, the display shows:
 Remove the card.
Caution - If the following is displayed, check that you have inserted the chip card the right way up:
Caution - If the following is displayed, remove the chip card and insert it the right way up, on the
green arrow side:
CHANGE TONER ?
YES= OK - NO= C
TONER OK
REMOVE CARD
CANNOT READ CARD
REMOVE CARD
ILLEGIBLE
CHANGE SIDE
Green arrow