User manual

6-14
Maintenance
 The following is displayed on the scanner control panel screen:
 Press OK.
 Once the chip card has been read, the display shows:
 Remove the card.
Caution - If the following is displayed, check that you have inserted the chip card the right way up:
Caution - If the followingis displayed, remove your card and insert it the right way up:
CLEANING
Cleaning the scanner’s reading devices
When one or more vertical lines appear on transmitted copies, follow these steps :
CHANGE DRUM ?
YES= OK - NO= C
DRUM OK
REMOVE CARD
CANNOT READ CARD
REMOVE CARD
ILLEGIBLE
CHANGE SIDE
 Open the scanner cover by
pushing it backwards until held
vertically in position.