User manual

6-16
Maintenance
Cleaning the paper feed roller
 1 - Turn off the printer and unplug the power cord.
 2 - Remove the drum/toner cartridge set from the machine.
 3 - Use a soft cloth to clean the paper feed roller.
 4 - Put the drum/tone cartridge set back in place and refer to the Replacing Cartridges paragraph,
page 6-2.
 5 - Close the printer cover, connect the power lead and power the machine using the switch
located on the front left hand side.
Caution - The fusing unit located inside the printer above the paper supply roller may become
burning hot during machine operation. Avoid touching it ; you could hurt yourself.