Operation Manual
3-2
Settings
Date en cours : 22 mai 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFK 23261430-5 36xx Sagem GB\Configuration.fm
1DPH
Your fax offers to print out your name on every document it transmits if you saved your name and
if the machine is set with
SENDING HEADER (refer to paragraph Technical parameters, page 3/7).
To save your name:
M
ENU : 23 - SETUP / YOUR NAME
+ Enter your name (20 characters max) then validate with the key OK.
7\SHRIQHWZRUN
You may connect your fax to either a PSTN or private network like auto switch exchange PABX.
You must define for example the network the most convenient.
To select the type of network:
M
ENU : 2611 - SETUP / NETWORKS / TEL. NETWORK / NETWORK TYPE
+ Select option PABX or PSTN then validate your choice with OK.
*HRJUDSKLFDOVHWWLQJVGHSHQGLQJRQPRGHO
These settings will enable you to use your terminal in different preset countries and in different
languages.
&RXQWU\
By choosing a country, you initialise:
• the settings for its public telephone network
• its default language
• its default type of keyboard.
To select the country:
M
ENU : 201 - SETUP / GEOGRAPHIC / COUNTRY
+ Select the required option and press the OK key to confirm.
1HWZRUN
This setting enables you to individually set the type of public telephone network so that your
terminal can communicate over the public network of the country you have chosen in compliance
with the applicable standards.
Remark : This setting is different from the NETWORK TYPE setting (p. 3/2), which allows choosing between public and
private network.
To select the network:
M
ENU : 202 - SETUP / GEOGRAPHIC / NETWORK
+ Select the required option and press the OK key to confirm.
/DQJXDJH
This setting enables you to choose a language other than that imposed by the COUNTRY setting.
LIASSE 23261430-5.book Page 2 Mardi, 22. mai 2001 1:35 13