Operation Manual

5-12
Operation
Date en cours : 11 juin 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFK 23261436-8 37xx Sagem GB\Utilisation.fm
=RRPDQG2ULJLQ
Your fax offers you to reduce or magnify a determined part of a document by 25 to 400 %.
+ Enter the desired zoom value with the numeric keypad (ZOOMING).
+ Validate your setting by pressing key OK.
If you wish, you can change the origin of the flat-bed scanner (by default, this is the front left angle
of the scanner window marked with two arrows)
By entering new values of X and Y given in mm (X < 210 and Y < 297), you will move the scanned
zone as shown on the figure below
.
+ Select the X and Y coordinates with keys 3 or 4.
+ Set the required coordinates with the numeric keypad.
+ Validate your setting by pressing the OK key.
&RQWUDVW
+
Set the desired contrast with keys 3 or 4.
+ Validate your setting by pressing key OK.
%ULJKWQHVV
+
Set desired brightness with keys 3 or 4.
+ validate your setting by pressing key OK.
0DUJLQV
If you want to shift the side margins of your document to the left or to the right:
+ Adjust the left / right margin shift (in steps of 0.5 mm) with keys3 or 4.
+ Validate your setting by pressing key OK.
3ULQWHUVHWWLQJV
%ULJKWQHVV
If the printed document still appears too dark after setting the scanner, you can make it lighter.
+ Set the desired brightness with keys 3 or 4.
scanned area
LIASSE 23261436-8.book Page 12 Lundi, 11. juin 2001 3:33 15