Operation Manual
Operation
5-13
Operation Settings Quick usageDirectoryMaintenanceSafety ContentsInstallation
Date en cours : 11 juin 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFK 23261436-8 37xx Sagem GB\Utilisation.fm
+ Validate your setting by pressing OK.
3DSHU
+
Select the type of paper NORMAL or THICK with keys 3 or 4.
+ Validate your setting by pressing key OK.
Remark : When the THICK type of paper is selcted, the printing speed is slowed down.
3DSHUWUD\
+
Select the paper tray to be used (AUTOMATIC, LOWER or UPPER) using keys 3 or 4.
+ Validate your setting by pressing key OK.
1LJKWVWDQGE\
If you want your printer to automatically switch to standby mode for the selected time slot:
+ Select YES or NO for standby with keys3 or 4(if you chose NO, the switching to standby
will be automatic all day long).
+ Validate your setting by pressing key OK.
27+(5)81&7,216
/2*6
The incoming and outgoing logs list the last 30 subscribers (ingoing and outgoing) made by your
fax.
An automatic print out will take place after every 30 subscribers. However, you may request a
print out at any time.
Each log (incoming or outgoing) contains a table with the following information:
• date and time of the ingoing or outgoing document,
• subscriber’s number or E-mail address,
• transmission mode (Std, Fine, SFine or Photo),
• number of pages sent or received,
• call duration,
• incoming or outgoing results: noted
CORRECT if properly transmitted
or
information codes for special calls (polling, manual subscribers, etc.)
• reason for call error (exemple: your subscriber does not answer).
LIASSE 23261436-8.book Page 13 Lundi, 11. juin 2001 3:33 15