Operation Manual

Maintenance
6-5
Operation Settings Quick usageDirectoryMaintenanceSafety ContentsInstallation
Date en cours : 11 juin 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFK 23261436-8 37xx Sagem GB\Maintenance.fm
+ Close the top cover and press it down gently but firmly until it locks into place.
+ Turn the printer back on using the switch located on its left-hand-side.
+ Press OK on the scanner keypad. The display shows:
+ Insert the SmartCard gauge into the appropriate slot ensuring that the chip is oriented as
shown in the drawing below.
+ : The display shows:
+ Press OK on the scanner keypad.
INSERT GAUGE CARD
RENEW
DRUM?
CONFIRM = OK
CANCEL = C
Maintenance.fm Page 5 Lundi, 11. juin 2001 4:52 16