Operation Manual
6-12
Maintenance
Date en cours : 11 juin 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFC 23260972-6_38xx Sagem GB\Maintenance.fm
7UDQVPLVVLRQIURPWKHIHHGHU
You have the choice between:
• waiting until the transmission takes place at the given time,
• restarting the transmisssion immediately by pressing , the document still present,
• abandoning transmission by pressing . To eject the document, press again on .
7UDQVPLVVLRQIURPWKHPHPRU\
You have the choice between:
• waiting until the transmission takes place at the given time,
• restarting the transmission using the transmission queue (refer to paragraph Immediately
perform transmission from the waiting queue, page 5/8) . In this case, for a document
composed of several pages, the transmission will take place from the page where the error
occurred.
• abandoning the transmission by deleting the corresponding command in the transmission line
(refer to paragraph Deleting a transmission on hold, page 5/9).
The fax machine makes at most 5 automatic redials.
Message
GIVE UP DIALING:
This message is displayed when transmission failed 12 times in a row. All the documents on hold
for transmission are then automatically cleared from the memory of the fax machine. To clear the
message
GIVE UP DIALING from the screen, press .
&RPPXQLFDWLRQHUURUFRGHV
The communication error codes appear in the logs and transmission reports.
*HQHUDOFRGHV
Code 01 - Busy or no fax answer
This code appears after 6 unsatisfactory attempts. Call later.
Code 02 - Burnt number
A number is burnt after 6 unsatisfactory transmission attempts. No recall is possible. You have to
validate the subscriber’s number a second time: refer to his record in the directory.
Code 03 - User break
A communication has been stopped by the user pressing the key .
Code 04 - Non programmed number
A number saved as a one-touch key or abbreviated number is not valid: check it. (Example: a
delayed transmission was programmed with a one-touch key and this key has been deleted in the
meantime).
Code 05 - Scanning default
An incident occurred at the place where the document is placed to be scanned, for example, the
sheet is jammed.
Maintenance.fm Page 12 Lundi, 11. juin 2001 5:43 17