User manual

5-22
Operation
Then, once the document has been scanned:
 Lift the flatbed scanner flap, turn over your card then close the flap
The following will be displayed:
Your fax machine will then print your card
PAPER TRAY
Default tray for local copy
With same paper format in both trays
In this case, all selections made for this parameter will determine the default tray in the local copy slip.
The tray can however be changed on a case by case basis in the slip.
With different paper formats in the trays
If the default setting is AUTOMATIC, the default tray in the local copy slip will be the one currently
selected (depending on last printout): UPPER or LOWER.
If the default setting is UPPER or LOWER, this will be the option proposed in the local copy slip.
The tray can however be changed on a case by case basis in the slip.
The table below summarizes the effects of the "default tray" parameter values on the local copy.
TURN OVER DOC
THEN OK
COPY IN PROGRESS
Default tray
parameter
Default tray in local copy
slip
2 trays with same paper
format
AUTO AUTO
UPPER UPPER
LOWER LOWER
2 trays with different paper
formats
AUTO tray selected last
UPPER UPPER
LOWER LOWER