Operation Manual

Operation
5-17
Operation Setting your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallation
Scanner settings
841 OK - ADVANCED FCT / COPY / B&W RESOLUTION
 The B&W RESOLUTION setting to adjust the resolution for photocopying. Select the
resolution:
ULTRA FAST , FAST , QUALITY or PHOTO by means of the
 or , keys, validate your choice by pressing the OK key.
842 OK - ADVANCED FCT / COPY / COLOUR RESOL.
 The COLOUR RESOL. setting to adjust the resolution for photocopying. Select the
resolution:
DRAFT , TEXT , TEXT/PHOTO or PHOTO by means of
the
 or keys, validate your choice by pressing the OK key.
843 OK - ADVANCED FCT / COPY / ZOOMING
 The ZOOM setting is used to reduce or enlarge part of the document by choosing the
original and the zoom value to apply to the document, 25 to 400%. Enter the zoom value
required using the keys of the digital key pad. Validate the choice with the OK key.
844 OK - ADVANCED FCT / COPY / ASSEMBLED
 The ASSEMBLED parameter is used to define the choice of your printer outputs; either
assembled or not assembled. Validate the choice with the OK key.
845 OK - ADVANCED FCT / COPY / ORIGIN
 If you wish, you can change the origin of the scanner.
 By entering new values of X and Y given in mm (X < 210 and Y < 286), you will move
the scanning zone as shown on the figure below.
 Select the X and Y coordinates with  or keys.
 Set the required coordinates with the numeric keypad or  or . Confirm your setting
by pressing key OK.
846 OK - ADVANCED FCT / COPY / CONTRAST
 The CONTRAST parameter is used to select the photocopy contrast. Adjust the contrast
using keys
 and, then validate the choice with the OK key.
y
DEBUT FEUILLE
FIN FEUILLE
x
Scanned area
TOP OF SHEET
TOP OF SHEET
TOP OF SHEET