Operation Manual
5-18
Operation
You can also directly adjust the desired contrast using the key, press this key several times
until the required adjustment is obtained without using
846.
847 OK - ADVANCED FCT / COPY / LUMINOSITY
The LUMINOSITY parameter is used to make your original document lighter or darker. Adjust
the brightness required using keys and, then validate the choice with the OK key.
848 OK - ADVANCED FCT / COPY / BINDING
The BINDING parameter is used to choose the long or short side according to the type of binding
of your document. Make your choice using keys and , then validate the choice with the
OK key.
Caution - All settings made using this menu become default settings of the machine.
85 OK - ADVANCED FCT / SCAN. & PRINT
Use keys or of the browser to scroll the setting described below that you want to modify.
Validate your setting by pressing the OK key.
851 OK - ADVANCED FCT / SCAN. & PRINT / PAPER
Select NORMAL or THICK paper using and keys.
Validate your setting by pressing the OK key.
Note: 1) When THICK paper type is selected, the print speed is slowed down.
2) Use the manual feeder for paper with a weight greater than 90 g/m
2
.
852 OK - ADVANCED FCT / SCAN. & PRINT / PAPER TRAY
Select the paper tray that you want to use; AUTOMATIC, LOWER or UPPER using and
keys.
Validate by pressing the OK key.
853 OK - ADVANCED FCT / SCAN. & PRINT / PAPER SAVE
This function prints all your documents duplex.
Note: This function requires the prior installation on the rear of your machine of the duplex unit and the additional
paper tray.