Operation Manual

Operation
5-35
Operation Setting your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallation
The MBX is initialised. If you wish to initialise another, press C and repeat the same procedure.
 To exit the MBX, press key.
Modifying the features of a MBX
71 OK - MAILBOXES / CREATE MBX
 Select a free MBX out of the 31 MBX, or enter the number of a free MBX directly (1-31)
then confirm your choice with OK.
 Enter the code of this MBX, if there is one, and confirm with OK.
 Select the menu MAILBOX CODE or MAILBOX NAME, then confirm your choice with OK.
 Perform data modification of the menu and confirm with OK.
 If needed, repeat the last two steps for the other menu.
Printing the contents of a MBX
73 OK - MAILBOXES / PRINT MBX
 Select a free MBX out of the 31 MBX, or enter the number of a free MBX directly (1-31)
then confirm your choice with OK.
 Enter the code of the MBX, if there is one, and confirm with OK.
All documents found in the MBX are printed and the MBX is emptied.
Deleting a MBX
Before deleting an MBX, you need to make sure it is empty, by printing its content.
74 OK - MAILBOXES / DELETE MBX
 Select a free MBX out of the 31 MBX, or enter the number of a free MBX directly (1-31)
then confirm your choice with OK.
 Enter the code of the MBX, if there is one, and confirm with OK.
 Confirm MBX deletion, by pressing OK key.
The MBX is deleted and will appear as a free MBX in the list.
Printing the MBX list
75 OK - MAILBOXES / PRT MBX LIST
The list gives the status of each MBX.