Operation Manual

Maintenance

6-17

Operation Setting your

machine

Getting startedDirectoryMaintenanceSafety ContentsInstallation

Caution - Use a soft cloth to clean the printer. Never use abrasive or corrosive detergents.

The fusing unit can become very hot during operation. To avoid injury - do not touch. 

Wait for at least 10 minutes after the printer has been turned off and make sure that the fusing unit

has cooled before cleaning the interior of the printer.

ERVICING

For guaranteed performance of your terminal, some maintenance work (replacing the fusing unit

and the transfer roll) has to be done on the printer approximatly every 200,000 printed pages.

Please contact your supplier for this operation.

SCANNER CALIBRATION

You can perform this operation when the quality of photocopied documents is no longer

satisfactory.

80 OK - ADVANCED FCT / CALIBRATION

 Confirm your choice by pressing the OK key.

INCIDENTS

COMMUNICATION ERRORS

If the communication fails, the fax advises you of an automatic retry later.

Example of what is displayed:

Transmission from the feeder

You have the choice between:

• waiting until the transmission takes place at the given time

Current time - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

FRI 11 SEP 20:13

Time of next try - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

0142685014 20:18