Operation Manual

Maintenance
6-37
Operation Setting your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallation
 3 - If paper is jammed as shown in A, remove the paper by pulling the center up. If paper
is jammed as shown in B, remove the paper by pulling the edge.
 4 - Open the rear cover and then the fuser cover, and remove the jammed paper.
Note: If the optional face-up tray is installed on the printer, remove that tray first before attempting to remove the
jammed paper.
Caution - The fuser unit inside the printer is hot. Do not touch it with your hands as it may
result in burn injury. Remove jammed paper carefully.
 5 - Push the paper transfer unit back in and close the fuser cover and rear cover.
Registration Roller
A
B
Registration Roller
Paper transfer
unitrelease lever
Paper transfer unit
Fuser Cove
Rear Cover