Operation Manual

Installation
1-9
Operation Setting your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallation
INSTALLATION OF THE TERMINAL
Installation of the base and the equipped interface
 Set the base down vertically, and insert
the columns of the equipped mechanical
interface into their respective openings.
Screw in and tighten the 8 mounting
screws
.
Take hold of the upper part of the
interface and set the assembly upright
.
 Optional equipment:
Place the additional paper tray on the
base, positioning it on its locating pins.
You can install up to three additional
paper trays.
 Optional equipment:
Place the duplex unit on the additional
paper tray, positioning it on its locating
pins
.