Operation Manual

R E AD Y
A TTE N TIO N
I N TE R F AC E
SIZE
TYPE
DA T A
GO
CANC EL M E NU
E N TE R
?
1 2 3 4 5 7 8 96
101112131415
1. The console's LCD screen.
2.
ATTENTION Indicator: 
On: A problem or error (e.g. a paper jam) has occurred. 
Blinking: The printer requires maintenance or is
warming up.
3. READY Indicator: 
On: The printer is ready, or printing the received
data . 
Blinking: An error has occurred. 
Off: Indicates that the printer is in standby mode.
Data will be received but will not be printed (see
GO key ).
4.
DATA Indicator: 
On: The data has been processed or stored on the
memory card.

Blinking: Data transfer in progress.
5.
 Key: Used to navigate in the sub-menus and to
adjust certain settings .
6.
 Key : Used to navigate the menus and to increase
numerical values.
7.  Key: Used to navigate in the sub-menus, to
adjust certain settings and to display help messages
when certain errors occur.
8. MENU Key: Used to access or exit the printer's menu.
9.
CANCEL Key: Used to cancel a print job.
10.
GO Key: Used to switch the printer between
Ready and Standby mode
.
11.
ENTER Key: Confirms the numerical values and
other selections.
12.
 Key: Used to navigate the menus and to devease
numerical values.
13.
Indicator: Shows the type of paper being
used in the tray .
14.
Indicator: Shows the paper size being used in
the tray .
15.
Indicator: Shows the interface being used
(PAR, USB, RES or --).
TYPE
SIZE
INTERFACE
PRINTER CONTROL PANEL