Operation Manual
3-18
Setting your machine
• servers, allows you to identify the name of the IP address of Internet SMTP providers (send) and
POP3 (MBX reception) and the address of DNS 1 and DNS 2 servers. The server address is made
up of 4 groups of 3 digits maximum, separated by dots.
• SMTP Authentification, used to activate the authentification protocol when the SMTP server
used requests this to end e-mails.
Access to connection and message service parameters
91 OK - INTERNET / SUPPLIER
Select the Internet provider from the list NO ACCESS, PROVIDER_1, PROVIDER_2,
PROVIDER_3, PROVIDER_4, PROVIDER_5, PROVIDER_6 or LOCAL NETWORK, and
press OK.
Choosing
NO ACCESS disables access to Internet functions.
92 OK - INTERNET / INIT. PROVIDER
921 OK - INTERNET / INIT. PROVIDER / CONNECTION
Enter the CALL NUMB., press OK.
Enter connection IDENTIFIER
1
, press OK.
Enter connection PASSWORD, press OK.
922 OK - INTERNET / INIT. PROVIDER / MESS. SERV
Enter Email IDENTIFIER, press OK.
Enter Email PASSWORD, press OK.
Enter E-MAIL ADR, press OK.
Access to servers parameters
923 OK - INTERNET / INIT. PROVIDER / SERVERS
Enter SMTP, press OK.
Enter POP3, press OK.
Enter DNS 1, press OK.
Access to the authentification SMTP parameters
924 OK - INTERNET / INIT. PROVIDER / SMTP AUTHENT.
In the ACTIVATION menu, select WITH to activate SMTP authentification then validate with OK
key.
1. If the identifier has more than 16 characters, the text will automatically slide over to the left.