Technical data

28
Appendix
Technical settings
Your MFJ Pro 321 is delivered with factory-de-
fault settings. However, you may adjust it to
meet your requirements by changing the tech-
nical parameters.
v Only change the technical settings if
prompted to do so by authorised service
personnel!
Press M, 29 and OK. Use / to select and
modify the desired parameter and press OK.
Technical data
General
Dimensions
(W×D×H)
460×397×190 mm
Weight approx. 8 kg
Power supply 220–240 V / 50–60 Hz
Power consumption
in stand-by mode
approx. 10 W
Memory 8 MB
Directory capacity 200 entries
Telephone
connection type
PSTN/PABX
Chip card ISO 7816-4
PC connection
Connection type USB slave 1.1
Operating systems Windows 98/2000/ME/
XP
Scanner driver TWAIN/WIA
Scanner
Type CCD colour
Resolution 600×600 dpi
Scanning area 216×297 mm
Scanning width 206 mm
ADF capacity 10 sheets max.
Flatbed scanning
speed
b/w 10.5 seconds/
page, colour 17.5
seconds/page
Printer
Type colour bubble ink-jet
Resolution 600×600 dpi
Printing speed b/w up to 9 pages/
minute, colour up to 5
pages/minute
Printing width 203.2 mm
Printing length b/w 284.3 mm, colour
279.1 mm
Paper dimensions width: 88.9–215.6 mm
length: 127–431.8 mm
Fax
Fax type ITU T30, G3
Connection type PSTN/PABX
Dialling type DTMF
Modulation V17/V21/V29/V27ter/
V34
Coding scheme MH, MR, MMR
Modem speed 33k6 bps
Resolution normal mode: 200×100
dpi
fi ne/photo mode:
200×200 dpi
super fi ne mode:
200×400 dpi
Guarantee
In order to apply the guarantee, you should
contact your dealer. Proof of purchase will be
required. Should malfunctioning arise, the deal-
er will advise you what to do.
If you bought your equipment from SAGEM di-
rectly, the following shall apply:
A SAGEM undertakes to remedy by repair,
free of charge for labour and replacement parts,
any defects in the equipment during a period
of twelve (12) months from the date of original
delivery of the equipment, where those defects
are a result of faulty workmanship.
During this twelve month guarantee period, the
defective equipment will be repaired free of
charge; the customer must however return the
defective equipment at his/her own expense, to
the address given by SAGEM After Sales De-
partment, the phone number of which can be
found on the delivery slip.
Unless the customer has concluded with SA-
GEM a maintenance contract in respect of
the equipment which specifi cally provides for
repairs to be carried out at the customer’s
premises, the repairs will not be carried out on
the equipment at the customer’s premises.