Technical data

9
Installation
1 Open the machine by pulling the lever under
the control panel.
2 Press the lever in the middle of the cartridge
holder to open the holder.
3 Take the ink cartridges out of their packag-
ing and remove the protective strip.
v Please make sure that the protective strip
was removed completely.
Be careful not to touch the nozzle or the
contacts!
4 Insert the colour cartridge with the con-
tacts forward and the “nose” down into the
left compartment of the cartridge holder.
5 Insert the black cartridge into the right
compartment. Close the cartridge holder.
You’ll hear a click when it snaps home.
6 Close the machine.
7 Insert the chip card “Plug ’n Print” with the
contacts facing up into the slot under the
control panel and confi rm with OK. Remove
the cartridge and repeat the process for the
second cartridge.
Cartridge alignment
1 After inserting the cartridges for the fi rst
time, the machine will print out a page to
check their alignment. VALUE A
2 Enter the value A where the image is the
clearest.
3 Confi rm with OK and repeat these steps for
values B, C and D. VALUE B
Your name and number
1 Enter your fax number (max. twenty digits)
and press OK (to enter a plus sign hold
down the CTRL key and press Q; to enter a
blank space, press the _@ key).
2 Enter your name by using the keyboard for
text input (max. twenty characters). You can
also enter a plus sign (CTRL and Q) or a
slash (CTRL and M). Press OK.