User`s manual

9
USING THE MACHINE AS A NETWORK PRINTER
11
Select any port (such as LPT1) and
click the "Next" button.
The port settings are configured after
installation. (Beginning from step 21.)
12
When the model selection window
appears, select model name of your
machine and click the "Next" button.
For the model name of your machine, see
"PART NAMES AND FUNCTIONS" in the
operation manual for copier.
13
When the printer driver selection
window appears, select the printer
driver to be installed and click the
"Next" button.
Select the checkboxes of the printer
drivers to be installed.
14
Select whether or not you wish the
printer to be your default printer and
click the "Next" button.
If you are installing multiple printer drivers,
the following window will appear. Select
the printer that you wish to use as your
default printer.
If you do not wish to use any of the
printers as the default printer, click the
"Set Default Printer" checkbox to remove
the checkmark.
15
When the window for entering a printer
name appears, click the "Next" button.
If you wish to change the printer name,
enter the desired name.
16
When the display font installation
window appears, select whether or not
you wish to install the display font and
click the "Next" button.
To install the display font, select the "PCL
Display Font" checkbox.
17
Click the "Next" button.
Begin installation of the printer driver.
To use the PS printer driver, the PS3
expansion kit must be installed.
Note
If you are running Windows 2000/XP
and a warning message appears
regarding the Windows logo test or
digital signature, be sure to click
"Continue Anyway" or "Yes".
Caution