User`s manual

11
USING THE MACHINE AS A NETWORK PRINTER
27
Select "Custom" and click the "Settings"
button.
28
Select "LPR" in "Protocol", enter "lp"
in "Queue Name", and then click the
"OK" button.
Be sure to enter "lp" in lower case letters.
29
Click the "Next" button.
30
Click the "Finish" button.
31
Click the "Close" button in the "Printer
Ports" window.
32
Make sure that a checkmark appears
by the printer port for which you
entered the IP address (example:
10.36.128.226) in Step 26, and then
click the "Apply" button.
The printer port changes to the network
port created in step 26.
This completes the installation of the
software.
• If you installed the printer driver, configure the
printer driver settings as explained in
"CONFIGURING THE PRINTER DRIVER"
(p.30).
• If you installed the PS printer driver, the PS
display font can be installed from the
"SG-PEK" CD-ROM that accompanied the
PS3 expansion kit. (p.28)