User`s manual

13
USING THE MACHINE AS A NETWORK PRINTER
13
In the window for setting the
destination print port name, make sure
that ":lp" appears at the end of the IP
address and click the "Next" button.
14
A window appears to let you check your
entries. Make sure that the entries are
correct and then click the "Finish" button.
If any of the entries are incorrect, click the
"Back" button to return to the appropriate
window and correct the entry.
Next, install the software.
15
Double-click the "setup" icon ( ) in
the CD-ROM drive.
16
The License Agreement window will
appear. Make sure that you understand
the contents of the license agreement,
and then click the "Yes" button.
17
Read the message in the "Welcome"
window and then click the "Next" button.
18
Click the "Drivers/Status Monitor"
button.
19
Select the checkboxes of the software
packages to be installed and then click
the "Next" button.
Click the "Display README" button to
show information on packages that are
selected.
Any name can be entered in
"Destination print port name"
(maximum of 38 characters).
If the language selection screen
appears after you double click the
"setup" icon, select the language that
you wish to use and click the "Next"
button. (Normally the correct language
is selected automatically.)
Note
Note