User`s manual

14
USING THE MACHINE AS A NETWORK PRINTER
20
Check the packages on the screen, and
then click the "Start" button.
The software packages to be installed will
be displayed on the screen. If an incorrect
package is displayed, click the "Back"
button and select the correct packages.
21
Begin installation of the printer driver (if
"Printer Driver" was selected in Step 19).
Follow the on-screen instructions.
22
When you are asked how the printer is
connected, select "Connected via the
network" and click the "Next" button.
23
When the port selection window
appears, select the port name you
created in step 13 and click the "Next"
button.
24
When the model selection window
appears, select model name of your
machine and click the "Next" button.
For the model name of your machine, see
"PART NAMES AND FUNCTIONS" in the
operation manual for copier.
25
When the printer driver selection window
appears, select the printer driver to be
installed and click the "Next" button.
Select the checkboxes of the printer
drivers to be installed.
26
Select whether or not you wish the
printer to be your default printer and
click the "Next" button.
If you are installing multiple printer drivers, the
following window will appear. Select the printer
that you wish to use as your default printer.
If you do not wish to use any of the printers
as the default printer, click the "Set Default
Printer" checkbox to remove the checkmark.
27
When the window for entering a printer
name appears, click the "Next" button.
If you wish to change the printer name,
enter the desired name.
To use the PS printer driver, the PS3
expansion kit must be installed.
Note