User`s manual

15
USING THE MACHINE AS A NETWORK PRINTER
28
When the display font installation
window appears, select whether or not
you wish to install the display font and
click the "Next" button.
To install the display font, select the "PCL
Display Font" checkbox.
29
Click the "Yes" button.
30
When "The installation of the SAGEM
software is complete" appears, click
the "OK" button.
31
Begin the installation of the Printer
Status Monitor (if "Printer Status
Monitor" was selected in Step 19).
Follow the on-screen instructions.
Click the "Finish" button when the
message informs you that setup is
successful.
32
When the "Finish" screen appears,
click the "Close" button.
When "After Windows system restarts,
connect the interface cable to the PC"
appears, click the "OK" button.
This completes the installation of the
software.
• If you installed the printer driver, configure the
printer driver settings as explained in
"CONFIGURING THE PRINTER DRIVER"
(p.30).
• If you installed the PS printer driver, the PS
display font can be installed from the
"SG-PEK" CD-ROM that accompanied the
PS3 expansion kit. (p.28)
After the installation, a message
prompting you to restart your
computer may appear. In this case,
click the "Yes" button to restart your
computer.
Note