User`s manual

17
USING THE MACHINE WITH A
PARALLEL OR USB CONNECTION
INSTALLING THE SOFTWARE
Installation in Windows XP (USB/parallel cable)
1
The USB or parallel cable must not be
connected to the machine. Make sure
that the cable is not connected before
proceeding.
If the cable is connected, a Plug and Play
window will appear. If this happens, click
the "Cancel" button to close the window
and disconnect the cable.
2
Insert the CD-ROM into your computer's
CD-ROM drive.
3
Click the "start" button, click "My
Computer" ( ), and then double-click
the CD-ROM icon ( ).
4
Double-click the "setup" icon ( ).
5
The License Agreement window will
appear. Make sure that you understand
the contents of the license agreement,
and then click the "Yes" button.
6
Read the message in the "Welcome"
window and then click the "Next" button.
7
Click the "Drivers/Status Monitor" button.
8
Select the checkboxes of the software
packages to be installed and then click
the "Next" button.
Click the "Display README" button to show
information on packages that are selected.
If an error message appears, follow the on-screen instructions to solve the problem. After the
problem is solved, the installation procedure will continue. Depending on the problem, you may
have to click the "Cancel" button to exit the installer. In this case, reinstall the software from the
beginning after solving the problem.
Note
The cable will be connected in step 15.
Note
If the machine is connected to your
computer with a USB cable or parallel
cable, the Printer Status Monitor
cannot be used.
Note