User`s manual

19
USING THE MACHINE WITH A PARALLEL OR USB CONNECTION
16
Begin installation of the PCL6 printer
driver.
"SAGEM MF-XXXX" will appear in the
"Found New Hardware Wizard" dialog
box. Select "Install the software
automatically (Recommended)" and click
the "Next" button. Follow the on-screen
instructions.
After completing the above steps, repeat the
installation procedure from step 1 if you are
installing the PCL5e or PS printer driver.
1.
Repeat the installation procedure from step 1.
2. In the screen of step 8, select only the
"Printer Driver" checkbox.
3. When the select printer driver to install
screen appears, remove the checkmark from
"PCL6" and select the checkbox of the
printer driver that you wish to install
("PCL5e" or "PS").
4. When the installer finishes, perform steps 15
and 16. A plug and play screen will appear
and installation of the selected printer driver
will begin.
This completes the installation of the software.
• If you installed the printer driver, configure the
printer driver settings as explained in
"CONFIGURING THE PRINTER DRIVER"
(p.30).
• If you installed the PS printer driver, the PS
display font can be installed from the
"SG-PEK" CD-ROM that accompanied the
PS3 expansion kit. (p.28)
If a warning window appears
regarding the "Windows logo test",
be sure to click the "Continue
Anyway" button.
Caution