User`s manual

21
USING THE MACHINE WITH A PARALLEL OR USB CONNECTION
12
When the interface selection screen appears,
select "USB" and click the "Next" button.
13
When the display font installation
window appears, select whether or not
you wish to install the display font and
click the "Next" button.
To install the display font, select the "PCL
Display Font" checkbox.
14
Follow the on-screen instructions.
When "The installation of the SAGEM
software is complete" appears, click the
"OK" button.
15
When the "Finish" screen appears,
click the "Close" button.
When "After Windows system restarts,
connect the interface cable to the PC"
appears, click the "OK" button.
16
Make sure that the power of the
machine is turned on, and then
connect the USB cable. (p.25)
Windows will detect the machine and the
Plug and Play screen will appear.
17
Follow the instructions in the Plug and
Play screen that appears in your
version of Windows to begin the
installation.
After completing the above steps, repeat the
installation procedure from step 1 if you are
installing the PCL5e or PS printer driver.
1.
Repeat the installation procedure from ste p 1.
2. In the screen of step 8, select only the
"Printer Driver" checkbox.
3. When the select printer driver to install
screen appears, remove the checkmark from
"PCL6" and select the checkbox of the
printer driver that you wish to install
("PCL5e" or "PS").
4. When the installer finishes, perform steps 16
and 17. A plug and play screen will appear
and installation of the selected printer driver
will begin.
This completes the installation of the software.
• If you installed the printer driver, configure the
printer driver settings as explained in
"CONFIGURING THE PRINTER DRIVER"
(p.30).
• If you installed the PS printer driver, the PS
display font can be installed from the
"SG-PEK" CD-ROM that accompanied the
PS3 expansion kit. (p.28).
In Windows 2000, if the following
screen appears while the files are being
copied (the message may appear more
than once), click the "Yes" button.
After the installation, a message
prompting you to restart your
computer may appear. In this case,
click the "Yes" button to restart your
computer.
Caution
Note