User`s manual

27
SHARING THE PRINTER USING WINDOWS NETWORKING
9
When you are asked how the printer is
connected, select "Connected via the
network" and click the "Next" button.
10
For the port to be used, select the
machine set as a shared printer, and
click the "Next" button.
You can also click the "Add Network Port"
button and select the printer to be shared
(the machine) by browsing the network in
the window that appears.
11
When the model selection window
appears, select model name of your
machine and click the "Next" button.
For the model name of your machine, see
"PART NAMES AND FUNCTIONS" in the
operation manual for copier.
12
When the printer driver selection
window appears, select the printer
driver to be installed and click the
"Next" button.
Be sure to select the same printer driver
as the printer driver used in the print
server (the machine).
13
Follow the on-screen instructions.
14
When the "Finish" screen appears,
click the "Close" button.
When "After Windows system restarts,
connect the interface cable to the PC"
appears, click the "OK" button.
This completes the installation of the
software.
• If you installed the printer driver, configure the
printer driver settings as explained in
"CONFIGURING THE PRINTER DRIVER"
(p.30).
• If you installed the PS printer driver, the PS
display font can be installed from the
"SG-PEK" CD-ROM that accompanied the
PS3 expansion kit. (p.28)
If the shared printer does not appear in the
list, check the settings in the printer server.
Note
After the installation, a message
prompting you to restart your
computer may appear. In this case,
click the "Yes" button to restart your
computer.
Note