8/11/03 17:14 Page 1 ENGLISH 251391176_myC-x_couv-en.qxd *251391176* SAGEM SA Mobile Phones Division Tel. +33 1 40 70 88 44 - Fax +33 1 40 70 66 40 - www.sagem.
You have just bought a mobile phone and we congratulate you on your choice. Your phone will allow you to use different international networks (GSM 900 MHz and DCS 1800 MHz) depending on the roaming agreements between the operators. We would like to remind you that this phone is approved to European standards. To get the most out of using your phone, we recommend that you read this manual carefully and keep it handy for future reference if needed.
Conformance Document SAGEM SA declare under its sole responsibility that the product Dual Band GSM/DCS Type myC-1 conforms to the requirements of the following EEC directives: EEC Directive 1999/5/CE Safety EN 60950: 2000 EMC EN 301 489-1 EN 301 489-7 Network 3GPP TS 51.010-1 v5.3.0 selected with GCF-CC v3.11.1 included Requirements GT01 v 4.7.0 TBR 19 Edition 5 TBR 20 Edition 3 TBR 31 Edition 2 TBR 32 Edition 2 EN 301 511 Health EN 50360 EN 50361 2 myC-1_en_00.
Functions at a glance Switch on Press . Call Dial the number then press . Answer Press . Hang up Press . Switch off Press (long press). Lock and unlock the keyboard from the standby screen Press ∗ then OK. Redial last number Press twice. Make a call from a number stored in the directory By name: enter the first letter of the name, press , scroll down the list to find your correspondent, then press to call. By location in the directory: enter the location number then press ∗ to call.
Menus at a glance Enter using or Navigate using and Confirm using OK Quit or return to the previous menu using C According to the configuration of the networks and associated subscriptions, certain functions may not be available (indicated by *). The phone menus will appear as listed below: Services Directory Directory menu Sort by location Create record Call groups Available memory Personal numbers Quit Text messages Write new...
Glossary Outgoing call A call made from your phone. Incoming call A call received by your phone. SIM card The card containing your subscription and access rights to services. The detachable part is the “micro-SIM”. PIN The personal code linked to your SIM card. Phone code The phone code is a secret code intended to protect the phone in case of theft. IMEI The identification number of your phone.
Contents Presentation of the phone ............................ 8 Function keys ................................................ 9 Alphanumeric keyboard ................................ 9 Key 1 ........................................................... 10 Key ∗ ........................................................... 10 Display ........................................................ 10 Getting started ............................................. 12 Information on the SIM card .......................
Contents Security ......................................................... 43 Changing the PIN number .......................... 43 Changing the phone code .......................... 43 Accessories .................................................. 45 Calculator .................................................... 45 Setting the alarm ......................................... 45 Setting the timer .......................................... 46 Game ............................................................
Presentation of the phone 1 - Ear phone/Speaker 2 - High definition graphics screen 3 - Programmable left key 1 4 - Programmable Central key 5 - Programmable right key 6 - Scrolling arrows 7 - Stop - End call - Cancel 8 - Operate/Call - Validate 9 - Battery charging 10 - Microphone WARNING! During a call, mind you do not obstruct the microphone with your hand. 2 4 3 7 11 5 8 6 OK C 1 2 ABC 4 GHI 5 JKL 7PQRS 8 TUV DEF 3 MNO 6 9 WXYZ 0+ 10 9 8 myC-1_en_01present.
Presentation of the phone Function keys Switch off – Reject a call – Hang up Switch on – Call a number – Receive a call C Short press: Return to the previous menu – Delete a character Long press: Exit menu mode – Complete deletion of the entry OK Confirm — - Programmable keys for direct access to the functions that you have selected - Volume control during conversation (left key —: lower, right key — : louder) - Contextual action and Entry and scrolling through the menus.
Presentation of the phone Key 1 A long press on key 1 allows you to access the voicemail service. Key ∗ A long press on key ∗ allows you to activate or deactivate the silent mode. Display The high definition graphics screen enables you to read messages easily. Various icons inform you about the status of functions.
Presentation of the phone The three keys located under the screen are allocated to actions described at the bottom of the screen just above the key, each time it is necessary. For example: Confirm Pressing the right key confirms the current function. 11 myC-1_en_01present.
Getting started Information on the SIM card SIM card This card must be handled and stored with care in order to avoid excessive stresses or scratches that would damage it. If your SIM card is lost, contact your Operator or Service Provider immediately. Note: Do not leave you SIM card within the reach of small children. To use your phone, you have a small card called a SIM card.
Getting started Installing the SIM card 1 Switch off your phone and disconnect the charger. The SIM card is inserted beneath the phone’s battery. 1 Turn the phone over and remove the rear cover by pushing the lock button and inserting the nail in the notch. 2 2 Take off the rear cover integrating the battery. 3 Slide the SIM card under the retaining plate, with the gold-plated contacts facing towards the phone and the cut-off corner pointed as shown on the drawing in the phone.
Getting started Charging the battery Your phone is powered by a rechargeable battery. A new battery must be charged for at least 4 hours before it is used for the first time. It will reach its nominal capacity after several usage cycles. When your battery has run down, the phone displays it and cuts out. To recharge your battery: Connect the charger to a wall outlet. Connect the end of the charging cable to the bottom of your phone.
Getting started Control of the PIN code If your phone displays SIM absent, press (long press) to switch off your phone and check that your SIM card is correctly positioned. Switching on/switching off, starting up To switch on your phone: Press to switch on your phone. If access to the SIM card is protected by a secret code, the phone will ask you to enter your PIN code. Warning If the wrong PIN code is entered three times in a row, the card will be locked.
Getting started Setting the date Set the date either by typing it in numerically or by using the scrolling arrows to alter the display. When the time and date are correct, confirm with the OK key. Searching for a network The phone then searches for a network on which it can communicate: Network indicator The indicator of the level of network signal received enables you to visualise the quality of reception. If it shows less than three bars, look for better reception to make your call in good conditions.
Getting started Menu access Direct access to menus To directly access a menu, press then enter the number of the selected menu. The menu functions permit you to verify or modify the various functions of your phone to adapt it to your needs. Press the scrolling arrows menu. or to access the Scroll through the menu using the scrolling arrows then press OK to access the selected menu. Each time you want to confirm an action, press OK. To abandon an action, press C. To exit the menu mode, press and hold C.
Initial communication Making a call The network is displayed. International call Dial the number. Press 0 (long press) to display + then dial the country code without waiting for a tone, then the number you require. Press . During the call, flashes on the screen, and tones may signal the establishment of a connection. Receiving a call Emergency services Depending on the operator, you can contact the emergency services with or without a SIM card or when the keyboard is locked.
Directory Directory display The quantity of phone numbers stored in the SIM card directory varies depending on the capacity of the card. Your Operator or your Service Provider can provide you with this information. You can store the telephone numbers that you call regularly: - in the SIM card, - in the phone itself. Different icons will inform you of the directory location where the number is stored when you search for it: SIM card directory Your phone’s directory SIM card pre-set directory.
Directory Deleting a number To delete the contents of a directory location, select the name using the scrolling arrows. Confirm by pressing OK. Select Delete, then confirm. Call groups You are also able to classify contacts recorded in the directory into Call Groups. To each of these groups you attribute certain characteristics (icon, ringing tone, vibrator, etc.). Creating a group Groups are defined by default in your phone.
Directory The selection of a call group is made when entering a number into the directory, or when modifying a number you have already saved. Activate the Call Groups function If you want the characteristics of the groups to apply to each call: Go into Directory/Directory menu/Call groups. Choose Activate groups. Tick the box and confirm. The calls received from contacts who do not belong to a Call group use the parameters provided in the Ringing and beeps menu.
Directory Modifying a group Select the group to be modified, and press OK. Choose Modify. Carry out the wanted modifications. Confirm by OK. Deleting a group Select the group to be deleted, and press OK. Choose Delete. Confirm by OK. Sorting Directory menu enables you to sort the stored numbers by name or location; for the latter, the free locations are indicated in the list. Sending a short message to a stored number Select the recipient scrolling using the scrolling arrows and confirm using OK.
Directory Directory memory space In Directory menu, select Available memory. Confirm using OK. The screen will display the amount of available space on the SIM card and on the phone itself. Displaying personal numbers Using Directory menu/Personal numbers menu, you can create records for your own numbers in order to be able to consult them.
Messages Access to this service depends on the network. For more information, consult your Operator or your Service Provider. Receiving a message Several types of message may be received: • text messages • melodies. When you receive a message, the phone beeps (the beep is selected using the menu Ringing and beeps/Volume and Choice of music/Messages). The icon is displayed on your phone screen. This icon remains on screen until the messages have been read. When the icon flashes, the memory is full.
Messages Meaning of the symbols at the top of the screen This symbol indicates a text message that has been written. If this symbol is flashing, it means that the message has not been sent. This symbol indicates a message that has been received. If this symbol is flashing, it means that the message has not yet been read. Meaning of the symbols in front of each message Text messages Melodies. Actions possible for a message received Select a message.
Messages Saving a melody in your phone A melody is saved in the Ringing and beeps/ Personalised ringing tone menu. If you have just listened to it, press the right key. or Select it in the list and choose the Save option by pressing the left key (Options). The space required as well as the space available in the phone are indicated. If the maximum number of melodies or the maximum capacity has been reached, you will be asked if you wish to delete some melodies or replace an existing melody with the new one.
Messages Editing a message using Easy Message T9™ T9™ mode is activated as soon as you create or modify a message. The Easy Message T9™ function helps you to easily enter messages. Select the Text messages/Write new... menu and press OK. Language Selecting the editing language By default, the language used is that which is activated on the phone’s menu display (or English if a language not supported by Easy Message T9™ is selected in the menu).
Messages If the word that you want does not appear in the dictionary, several additional modes allow you to vary the nature of the words entered. Additional entry modes The right key selects one mode or another. The 123 mode inserts numbers. The ABC mode enters words that do not exist in the dictionary or in another language. To obtain a letter, press successively on the relevant key until the desired number or letter appears. The # key allows you to enter symbols.
Messages Punctuation marks Punctuation marks are obtained by using either the 1 key (except in 123 mode), or using the Insert symbols mode (quick access using # key). Accented characters Accented characters are automatically generated in the word in Easy Message T9™ mode. In ABC mode, press successively on the key until the accented character appears.
Messages Options for messages in the list When a message has been selected from the list of messages, pressing the left key (Options) displays the following actions: • read it • send it • delete it • zoom/Deactivate zoom • modify it. When sending a long message, the number next to the icon indicates the number of calls required to send the message. When Write new...
Calls Forwarding voice calls Look out for incompatibilities; for more information, consult your Operator or your Service Provider. The forwarding number to the messaging centre depends on the subscription type. Warning Cancellations of forwarding can cause particular reactions in certain networks. Depending on your subscription, this service allows you to transfer incoming calls to another number or a mailbox.
Calls For services specific to a network, such as mailboxes, short dialling is only valid when covered by the particular network. You may possibly prefer an international number. This memory is linked to the phone and not to the SIM card. Viewing the list of the last numbers used You can consult the list of the last numbers used (outgoing and incoming if available). To redial a number: Select from the list using the scrolling arrows.
Calls Anonymous mode You can decide whether the person you are calling is given your phone number or not. • Preset: the phone network default mode. • No: you do not wish to use the anonymous mode and the person you are calling will know your number. • Yes: you wish to use the anonymous mode and the person you are calling cannot know your number. Your number • On outgoing calls you can check that your phone number is displayed on the phone of the person you are calling (CLIR).
Calls Authorising double call Call waiting (Service depending on the operator) You can activate, deactivate and view the status of the call waiting service in order to check whether it is active or not. During a call, a special tone can inform you that another caller is trying to reach you. The caller’s number - and name, if stored - is displayed on the screen.
Calls Voice mail number To program a special permanent call number, type in this number and confirm. This number is used when calling the voice mail centre with the programmable keys. Local information distribution This menu allows you to activate and select reception of information distributed by the network. Placing calls on hold (Service depending on the operator) Warning In this case, pressing ends all calls. During a call, you can put the current call on hold by pressing OK.
Ringing tones Volume and choice of music There are numerous tunes available (including a “silent ringing tone”) and several volume levels including a crescendo. You can set your phone to ring on receiving calls and/or messages. You can, during adjustment, listen to the melody selected or not: activate or deactivate by pressing the central key; the symbol appears barred or not. Select the ringing tone required using the scrolling arrows. Press the right key to move on to the next section.
Ringing tones You can then modify the selected melody (if the copyright allows it), listen to it or select one of the following options: • change its title • send it by message to another person (if it is not Copyright protected) • consult its memory capacity • consult the available memory • delete the selected melody • delete all melodies. Setting the vibrator Wherever you require your calls to arrive discreetly, you can use the vibrator or select the silent mode.
Ringing tones Setting the beeps You can select the tones produced by your keypad: Beep, DTMF (musical keys) or non active tones (in this last case, when you press your keyboard, it does not make a noise). Different controls are available: Setting the keypad tones Select the tone required using the scrolling arrows and confirm (press the right key).
Controls Customizing your phone Installing the energy saving mode In order not to use the phone’s screen light and thereby increase its operating time: In the Customization/Energy saving menu, check No light and press OK to confirm. Configuring the idle mode The frequency of display of the screen saver has a direct impact on the phone's operating capacity. For optimal operating capacity, set the maximum interval. In the Customization/Screen Saver menu, use the scrolling arrows to select the screen saver.
Controls Select the type of response You can reply to a phone call: - either automatically, if you have ticked the Automatic ans. box and confirmed by pressing OK - or by pressing any numeric key if you have ticked the Any key and confirmed by pressing OK. Selecting the network Network When your home network is not accessible (abroad, for example), your phone automatically searches for another available and authorised network in the order of preference indicated by the list on the SIM card.
Controls Preferred networks To program a list of preferred networks into your SIM card: Use the scrolling arrows to select from the list. Confirm. If the network is not on the list, select the country code then the network code (ask the organisation from which you obtained the SIM card). Setting the time and date Setting time/date/Control menu Set the hours and minutes by pressing on the corresponding numbers or by scrolling through the values using the or arrows.
Controls Converting currencies This menu enables you to convert one currency into another. Using the scrolling arrows, you can select: Rapid exchange If you tick the Rapid exchange box, the converter will operate on the standby screen, enter the digits required and use the scrolling arrows to perform a conversion. Exchange rate Enter the conversion rate corresponding to the two selected currencies. Currencies Enter the symbols of the two currencies to convert.
Security Changing the PIN number Warning You can change your PIN number: If the wrong PIN code is entered three times in a row, the card will be locked. To unlock your card, call the organisation which issued your card for guidance in unlocking it. To the question: Old pin number ?, enter your old PIN code and confirm (press the right key). If your SIM card is permanently locked, contact your Operator or your Service Provider to obtain a new card.
Security To change the phone code, you must first check that it is active (Control phone code menu). To activate: To the question: Phone code?, enter 0000 and confirm (press the right key). Tick the Phone control box and confirm by pressing OK. To deactivate: To the question: Phone code?, enter your code (possibly changed) and confirm (press the right key). Do not tick the Phone control box and confirm by pressing OK: it will reset the code to 0000.
Accessories Calculator right key central key ∗ # OK C ∗ or # or @ or right key right key You can operate the calculator using the following keys: Add Subtract Multiply Divide Equals Delete Long press on: Decimal point Monetary operations if there is no calculation in progress (See chapter Controls) Monetary conversion From the standby screen, you can convert a currency into another according to the settings chosen (calculator right key) or menu (Controls/Currency converter).
Accessories The ringer is stopped by pressing any key; the alarm remains programmed. The alarm function remains active when the phone is switched off. It is not affected by silent mode. Setting the timer The same procedure is applied as for the alarm function, but in this case you start a time clock running against a defined value. The phone must remain switched on. 46 myC-1_en_10accessories.
Game One game is available. The presentation menu guides you on how best to use it. 47 myC-1_en_11games.
Available accessories Available accessories Warning Do not connect/disconnect the special socket on your phone during a call. Different accessories are available on your phone: • Additional batteries • Additional chargers. Upkeep Clean your phone using a soft slightly damp non fluffy cloth. Battery Warning Certain chemical products can damage plastic. Do not use aerosols, certain special cleaning products, corrosive products, solvents, alcohol and detergents.
Recommendations Recommendations CE marking on the unit conforms to directives 1999/5/EC, 89/336/CEE and 73/23/CEE. The use of your phone is controlled by safety regulations intended to protect both the user and his/ her environment. Electrical safety Only use the appropriate chargers contained in the manufacturer’s catalogue. Using another charger could be dangerous and will invalidate the manufacturer’s warranty. The main plug socket must be easily accessible.
Recommendations Road safety Except in an emergency, never use your phone when driving. Always keep your eyes on the road when you are driving. Warning To make a call, pull to the side of the road, then make your call. Abide by the current laws. Ensure that no part of your body is permanently close to the aerial unless there is a metal screen (e.g.: a vehicle roof, …). The phone must be shielded sufficiently from electronic equipment in the vehicle.
Recommendations General precautions Do not attempt to open your phone and repair it yourself. The manufacturer cannot be held responsible for any damage/accident that may result from this. Any work carried out by non-authorised personnel will invalidate your warranty. Do not use your phone in damp areas (bathroom, swimming pool…). Protect it from liquids and other moisture. Do not expose your phone to extreme temperatures from - 10°C to + 55°C.
Recommendations SAGEM SA cannot be hold responsible for the contents of messages, programs and downloadable object and for the direct or indirect damage which may be cause to the user of the phone or the phone itself. Note on downloading facilities Your mobile may allow you to download ringtones. You must check that these objects are free of copyright. SAGEM is not responsible for the content of downloaded objects.
Technical Characteristics Weight: 78 g Size: 86 x 44 x 20 mm Original battery: Lithium Ion 550 mAh or 680 mAh (depending on model) Battery life calls/standby: up to 4 h/280 h The technical characteristics of the product are subject to change without notice. This mobile phone complies with European requirements regarding exposure to radio waves. Your mobile phone is a radio transmitter and receiver.
Technical Characteristics Tests for SAR have been conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network.
Troubleshooting Problem - Situation Actions The phone does not turn on Remove the battery and then replace it. or Connect the phone to the charger (check that this is plugged in) for approximately 5 minutes. No network recognised Remove the SIM card. Check that there is no dust or grit in the SIM slot. Replace the SIM card being sure to push it right up to the stop point. Calls to a messaging service or voice server do not get through Check in the Ringing and beeps/Tones menu that the box is ticked.
Troubleshooting Problem - Situation Actions Error message: SIM NOT PRESENT Check that the SIM card has been inserted correctly. Examine the SIM card. If it is damaged, contact your mobile phone operator sales point. If the message is still displayed, contact the after sales service. Error message: INCORRECT PIN The PIN has been incorrectly entered. If the PIN is entered incorrectly three times, the SIM card is blocked. Error message: SIM BLOCKED The PIN has been incorrectly entered three times.
Troubleshooting Problem - Situation Actions The phone display does not change Press a key. If nothing is displayed, check the position of the SIM card. If the problem continues, contact the after sales service. No connection made Check the form of the number called. Check that there is at least one field strength dot showing. If R is displayed but there is no mobile phone operator name, only emergency calls are allowed. Check that you have not used all your credit with the mobile phone operator.
Troubleshooting Problem - Situation Actions Cannot send messages Check that the SIM card provides this service. Check that the message server is correctly set up. Try to make a call to check that the phone and the network are operational. Try sending the message later. No voice box Check that the SIM card provides this service. Set up the redirection to the voice box using the information provided by the mobile phone operator. 58 myC-1_en_15dépannage.
myC-1_Notes.
myC-1_Notes.