Operation Manual

45
Introduction
1
2
3
4
5
7
Options
Appendix
Telephoning
Directory
Settings
Fax
TAD
Printing
Appendix
6
Doc control
Advanced
functions
&    
The result of each communication is given by the logs (transmission/reception) and the communication
report. In case of failure, the result is a code, whose meaning is as follows:
) 
Code 01 - Your party does not answer
Please call later.
Code 02 - The called number is suspect, since no fax answers
Check the number of your party.
Code 03 - STOP
You pushed on STOP during the communication.
Code 04 - Invalid abbreviated number
Check the number.
Code 05 - Document feeder failure during the communication
Document jam or failure of the document feeder.
Code 07 - Failure in the operation of the remote terminal or line
Restart the communication.
Code 08 - The document you sent may not have been correctly received
Send it again and check with your party.
Code 0A - Active polling
You tried an active polling while the remote terminal had no document to be polled.
Code 0B - Difference between the number of pages forecast at transmission and the number of
pages sent
Check the number of pages.
Code 13 - Full memory
Fax reception has become impossible.
Code 17 - Protected access
Your machine is in protected access; a party tried to call you while he/she did not have your password.
Code 23 - Unknown mailbox No
The number of the mailbox you entered is unknown by your party’s machine.
• Remove the gauge housing cover and make sure the gauge is
present and correctly positioned.
• The ink ribbon is completely used: install a new printer ribbon
with its new gauge.
• Open the front cover and check the document path.
• Print the received faxes (and/or listen to the vocal messages re-
ceived).
• Other cases • Call your after-sales service.
MISSING GAUGE
CHANGE RIBBON
REMOVE DOCUMENT
MEMORY FULL
A