Operation Manual

28
TAD (Menu 4)
$ 
&DOOVFUHHQLQJ
This function enables you to listen to the caller leaving you a message on your TAD, before deciding on whether
to pick up or not.
+ PRESS M, 4, 6, OK
+ Select the required option using the or key:
•
WITH: you can hear the messages as they are recorded on your TAD, and:
- adjust the SPEAKER volume using the and keys,
- pick up to answer the call.
•
WITHOUT: messages are recorded in silence, only a message on the screen tells you you are receiving a
call and a message is being recorded:
- you can pick up to answer the call.
+ Press OK to confirm.
❑ The call screening feature is not available if you have activated the privileged access mode (see below).
3ULYLOHJHGDFFHVV
This function enables you to choose a code, which you will give to those persons who may call you at a given
moment (e.g. your collaborators during a meeting or your close relatives from a certain time).
3DUDPHWHULVDWLRQRIWKHSULYLOHJHGDFFHVVFRGH
+ PRESS M, 4, 8, OK
+ Enter a privileged access code other than 0000 and different from the remote interrogation code.
+ Press OK to confirm.
3XWWLQJWKHSULYLOHJHGDFFHVVPRGHLQWR VHUYLFH
+ PRESS M, 4, 7, OK
+ Choose WITH using the and keys.
+ Press OK to confirm.
3ULYLOHJHGFDOOV
Only those privileged callers having your access code will be able to call you.
To do so, they should proceed as follows:
+ Dial your number.
+ Wait until your unit answers.
+ Press the * key during the greeting message, then enter the 4 digits of your privileged access code: your
machine only starts ringing then.
❑ If you do not answer, the caller will have the possibility to leave a message on your TAD.