Operation Manual

38
Advanced functions (Menu 7)
7 
The technical parameters are arranged into a list in which you move using the and keys. To access
technical parameters:
+ PRESS M, 7, 9, OK
02 TX HEADER: you can insert your name, your fax number, the date and time on the header of
the fax received by the addressee.
03 TX LOCK UP: lock up the fax transmission speed.
04 ANTI ECHO: inhibit the satellite echo in case of fax problems in long-haul calls.
10 RX HEADER: print the sender’s name and fax number as well as the date and time on the header
of the fax you receive.
11 RX LOCK UP: lock up the fax reception speed.
20 REDUCE MODE: choose the printing reduction mode (received faxes, local copies ): automatic or
fixed.
21 REDUCE RATE: set the printing reduction rate.
22 NB OF PAGES: give the number of pages printed (received faxes and local copies) since machine
switch-on.
40 RECALL LENGTH: choose the in-line interrupt time (long or short) of the R key "Flash" signal.
50 SORTED PRINT: print documents in reverse order of reception (or scanning for a local copy)
depending on model.
5     
You can control your machine remotely from an extension tone dialling telephone set in your installation.
❑ If the extension set is configured in pulse dialling mode, type * to switch it to tone dialling mode.
6   7$'
If you take the line from an extension set and your machine did so before you and is playing your TAD’s greeting
message, press # then 0 to switch off the TAD.
6    
If you take the line from an extension set and you cannot hear anyone speaking, you can switch your machine
remotely to fax reception mode by typing # then 7.
A