User's Manual

! 3 - Installing the SAGEM F@st

1000 modem

User Guide - N56815740110

Page 3-28

No reproduction or communication without the written consent of SAGEM SA

3.4 Installing for Windows Millennium

For Windows Millennium, installation of the SAGEM F@st

1000 modem is carried out according to

the following process:

! Installing the modem drivers,

! Configuring a new dial-up connection.

3.4.1 Installing the modem

! Switch off the modem if it is powered by unplugging the power supply cable either on the modem

side (connector marked PWR), or on the mains side.

! Switch on the PC and wait for the complete startup of Windows ME.

! Insert the installation CD-ROM; the welcome page appears after a few seconds.

If this screen does not appear automatically proceed as follows:

From the Start menu select Run then enter <Drive letter for the CD-ROM>:\English\Setup.exe.

! Select Modem setup on this page.

The following screen appears:

The install program copies the files necessary for the installation onto the PC's hard drive.

! Make the modem connections when the application prompts you.

! Connect the modem to the PC with the USB cable, and to the telephone line (ADSL) with the line

cable.

! Connect the power supply cable to the modem (connector marked PWR), then connect the mains

adapter to power up the SAGEM F@st

1000.

After connecting the modem, the PC installs the drivers ADSLBOOT, VVBusUSB and VVBATM.