Installation guide

21 Safety on your modem/router
SAGEM F@st™ 1500 / 1500WG
SSID and WEP key (SAGEM F@st™ 1500WG only)
2
These settings protect your wireless network against local intrusions.
Look up the "Configuring the wireless network" section on page 17 to modify these
settings.
Filtering the Mac addresses (SAGEM F@st™ 1500WG only)
3
This function makes it possible to limit the number of computers with access to your wireless
network.
The MAC address is the identification number of the network cards.
To obtain the MAC address of a wireless network card:
- in Windows 98: Start then Run, key in winipcfg.
- in Windows XP, 2000, Me: Start then Run, key in cmd then ipconfig /
all. Validate by pressing Enter.
- Identify your wireless network card in the list which appears by means
of the "Description" line.
- The MAC address sought corresponds to the "Physical address" line.
Filtering the MAC addresses on the wireless network
• The access control to your
wireless network is
disabled by default. To
enable it, choose Enable
MAC Filtering in the
appropriate field.
After you enter the MAC
addresses, click on Apply.