User's Manual

page 6/46
Note d’étude / Technical document : URD1 – 5625.1 – 006 / 69796 Edition 03
Document Sagem Communication Reproduction et divulgation interdites
Sagem Communication document. Reproduction and disclosure prohibited
1 Overview
1.1 Object of the document
The aim of this document is to describe some examples of hardware solutions for developing some products
around the SAGEM MO300 M2M Module. Most part of these solutions are not mandatory. Use them as
suggestions of what should be done to have a working product and what should be avoided thanks to our
experiences.
This document suggests how to integrate the MO300 M2M module in wireless communicating devices such as
GSM Gateway, POS, EDGE/GPS Tracking system, Wireless modem : connection with external devices, layout
advises, external components (decoupling capacitors…).
1.2 Reference documents
[ 1 ] URD1 – 5625.1 – 004 69772 - MO300 series modules specification
[ 2 ] URD1 - 5625.1 - 014 69979 - AT Command Set for SAGEM Modules
1.3 Modification of this document
The information presented in this document is supposed to be accurate and reliable.
SAGEM assumes no responsibility for its use, nor any infringement of patents or other rights of third parties
which may result from its use.
This document is subject to change without notice.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
1.4 FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received; including interference that may cause undesired
operation.