Internet Radio RM50 User Guide English
Introduction WELCOME Dear customer: Thank you for purchasing a SAGEMCOM WiFi IP Radio; we appreciate your trust in us. This product was manufactured with the upmost care, should you encounter any difficulties during its use, we recommend that you refer to this user guide. You can also find information on the following site: http://support.sagemcom.com The new material is guaranteed (parts and labour) by SAGEMCOM under the conditions and according to procedures defined on the site www.sagemcom.
Introduction Recommendations and safety instructions Do not install your IP Radio in a humid room (bathroom, laundry, kitchen, etc.), or within 1.50mof a tap or water source, or outside. Your IP Radio should be used at an ambient temperature of between 15 °C and 35 °C for optimum sound results. Do not set up your IP Radio in a dusty environment as dust deposits might adversely affect the sound quality. Avoid objects or liquids getting into the unit.
Table of Contents 1. Your IP Radio 6 Main Features Unpacking Front Panel Rear Panel Remote Control Menu Structure 2. Getting Started 6 6 7 8 8 10 11 Turning On The Device for The First Time Adjusting The Volume Text Entry Standby Mode 3. Listening To Music 11 16 16 17 18 Listening To Internet Radio Listening To FM Radio Listening To Home Music (UPnP) Favorite List 4.
Table of Contents ECO Config Backlight Brightness Volume limitation Network Config Scan For Networks View Config Edit Config 5. Appendix 32 32 32 33 33 33 33 34 36 Care And Maintenance Problems 36 36 6. Specifications 39 7.
Your IP Radio 1. Your IP Radio This product is an IP Radio that, once connected to an Internet gateway, will allow you to access worldwide Internet radio stations and to listen to your digital music files stored on your PC, or on a multimedia UPnP server (Home Music). It can also be used as an alarm clock for wake-up and important appointments. 1.1 Main Features 111 222 333 444 555 666 WiFi 802.
Your IP Radio 1.3 Front Panel 1 2 3 4 5 6 12 12 9 7 8 10 11 11 1. Display Screen 2. PRESETS 3. MODE 4. VOL. 5. MENU 6. STATIONS 7. Navigation Wheel 8. C 9. INFO 10. SMART RANDOM SWITCH 11. SMART RANDOM THEME 12. Speakers Displays contents on the screen. [1] Press and hold to display a list of available FM stations. [2] Press to activate auto/manual scan. Displays the Mode menu. Enables volume control on the Wheel. Displays the settings menu.
Your IP Radio 1.4 Rear Panel 1 2 3 4 R AUDIO 5 6 L 5V DC 1. POWER 2. USB Port 3. 5V DC Power Jack 4. Audio Line Out Jack Left/Right 5. Antenna Cable 6. Headset Jack [1] Press to shut off the music source currently playing and put the device into the Standby mode. [2] Press and hold to put the device in the Power off mode. Connect to USB cable for ffirmware upgrade only. Plug in the power adaptor. Plug in external speakers. Reception of radio signals. Plug in an external headset.
Your IP Radio 1. Mode 2. Snooze 3. Back 4. VOL +/VOL 5. Mute 6. Presets 7. Stations 8. Menu 9. On/Off 10. Info 11. Smart Random SWITCH 12. Smart Random THEME 13. UP and DOWN 14. Previous 15. Next 16. Play/Pause/Select Displays the Mode menu. When the alarm is on, press to shut the alarm off and reactivate again later. Act as the BACK button in all display screen. Enables volume control. Mute all the sound. [1] Press and hold to display a list of available FM stations.
Your IP Radio 1.
Getting Started 2. Getting Started 2.1 Turning On The Device for The First Time 2.1.1 Network Environment Please confirm that your wireless router or Access Point (AP) is connected to the broadband network. The diagram below describes the network environment that should be established to use your IP Radio. Internet Wireless Router DSL/ Cable Modem 2.1.2 Setting Up The device R AUDIO 5V DC L 5V DC (1) Plug the included power adapter into a wall outlet.
Getting Started After the device is turned on, a welcome screen appears. Note: Turning on the device for the first time will require you to set up the Network, Language and Time Zone for your device. Please follow the setup guide for proper setup. The device will scan for network connection automatically. 2.1.3 After A Network Is Found After scanning and a network connection is found, a Scan for networks menu displays: Rotate the Wheel to select the desired network connection method.
Getting Started AP List (1) Press the Wheel to select the AP list menu. (2) Select a desired network from the list. Note: If you have selected a network with a lock icon at the front, you must enter the password for the selected network. On the text entering screen, rotate the Wheel to choose the characters or numbers from the list at the bottom of the screen. Press the Wheel to select the character. Rotate the Wheel to select End to quit the edit screen and start connecting to the network.
Getting Started WPS PIN (Personal Identification Number): Use the PIN code to connect to the AP. (1) Select WPS PIN on the menu. (2) The PIN code is generated automatically or you can choose Refresh if you need to change the PIN code. (3) Open the WPS configuration page of your AP on your computer, and then enter the PIN code to establish a connection. 2.1.
Getting Started Time Zone Select your time zone in the device to synchronize the date and time with the Internet. The device will automatically set up the local time zone. Choose YES to confirm the Time zone selection. (1) Choose NO to continue the Time zone setting. (2) Rotate the Wheel to choose your time zone. (3) Press the Wheel to activate the setting. After the Network, Language and Time Zone settings are set, the menu screen will be displayed. 2.1.
Getting Started 2.1.6 Demo Mode If no action has been taken from the Network Configuration menu for 5 minutes, the device will display the Demo Mode with music. Press any button on the device, except the Wheel for volume adjustment, to quit the demo mode. Note: For the first time initialization, press any button, except the Wheel, will quit the demo mode and return to Network Config menu. 2.2 Adjusting the Volume While the device is playing music from any source, press the VOL.
Getting Started 2.4 Standby Mode While the device is playing from any music source, press Power on the device or On/Off on the remote control to stop playing from the music source and enter the Standby mode. In the Standby mode, rotate the Wheel or press SELECT on the remote control will have no effects on the status of the device. If the alarm has been set, the standby screen will display an alarm icon. When the alarm is ringing, press POWER on the device or On/Off on remote control to turn alarm off.
Listening to Music 3. Listening To Music This IP Radio device is a high-performance audio player that can play music from various types of sources. You can use it to listen to Internet radio from all over the world, local FM broadcasting services, and music files in your computer. The following explains how to listen to music using this IP Radio device. 3.1 Listening To Internet Radio With the Internet radio function, you can listen to music or programs from Internet radio stations.
Listening to Music 2. Search by name: When you choose to search by name, a text edit screen will appear. (1) Rotate the Wheel to choose characters or numbers from the list at the bottom of the screen. Press the Wheel to select the character. (2) Choose End to quit the edit screen. (3) Press the Wheel to start loading the available stations. (3) Rotate the Wheel to select from the station list. (4) Press the Wheel to start playing the selected station. 3.
Listening to Music 6. vTuner ID: Press the Wheel to display your vTuner ID information. 3.1.2 The Playback Screen The playback screen of the Internet Radio (see diagram below). Press the INFO button to display the music data you are listening to. 3.1.3 Key (and remote control) command on the playback screen Power ( ) PRESETS C( ) Wheel SMART RANDOM SWITCH STATIONS SMART RANDOM THEME INFO 1. Press to stop the music source currently playing and enter the Standby Mode. 2.
Listening to Music 3.2 Listening To FM Radio With the FM Radio function, you can listen to music or programs broadcast from FM radio stations. Rotate the Wheel to choose and press the Wheel to activate the FM Radio function in the main menu. 3.2.1 Search For A Station (1) Press PRESETS on the device to start AUTO/MANUAL scan. Or press and hold it to scan all the stations available. (2) Press the Wheel to switch between AUTO and MANUAL.
Listening to Music 3.2.3 Key (and remote control) command on the playback screen Power ( PRESETS C( ) Wheel STATIONS ) 1. Press to stop the music source currently playing and put the device in the Standby Mode. 2. Press and hold to connect to the AP automatically and then start to play the last tuned station. 1. Press to start AUTO/MANUAL scan. 2. Press and hold to scan and display a list of available FM Radio stations. 1. Press to show the station list. 2.
Listening to Music 3.3 Listening To Home Music (UPnP) With the Home Music function, you can listen to music or programs that are stored in other UPnP servers. Rotate the Wheel to select and then press the Wheel to activate the Home Music function in the main menu. 3.3.1 Search For A Media Source With the Home Music function, you can listen to music or programs that are stored in your local area network (LAN).
Listening to Music 3.3.2 The Playback Screen The playback screen of the Home Music is shown below. The screen displays the artist name, album name, the playing time and duration time. 3.3.3 Key (and remote control) command on the playback screen Power ( Wheel PRESETS STATIONS C( ) ) 1. Press to stop the music source currently playing and enter the Standby Mode. 2. Press and hold to connect to the AP automatically and then start to play the last played music file. 1. Rotate to adjust the volume. 2.
Listening to Music 3.4 Favorite List 3.4.1 Adding A Station To The Favorite List (1) In the playback screen, press STATIONS on the device or on the remote control to view the favorite list. From the list you can have access to your favorite stations easily. (2) Press and hold STATIONS to save the currently playing station in the favorite list. The icon will appear on the screen when the station has been added successfully. 3.4.
Settings 4. Settings In this menu, you can adjust IP Radio settings according to your own preferences. See sections below for more setting details. Press Menu on the device to access this menu. 4.1 Audio profile In this section, you can set up an Audio profile. In the Audio Profile list, rotate the Wheel to choose a setting and then press the Wheel to select an item. Note: The default Audio Profile is set to Off.
Settings Rotate the Wheel to adjust the equalizer value and then press the Wheel to confirm the adjustments. 4.2 Time setup In this section, you can set up the Sleep timer or Alarm. 4.2.1 Sleep Timer Sleep Timer function is used to set a screen off period of time and allows the device to enter the Standby mode. Adjust the Sleep Timer setting by rotating the Wheel to choose a time (15 mins, 30 mins, 45 mins, 60mins) and then press the Wheel to activate the function.
Settings 4.2.3 Alarm 1&2 Alarm function is for you to set up wake-up Alarms or to remind you of important dates or times. You can set up 2 Alarms. Both Alarm 1 and Alarm 2 have the same set up method. Alarm 1 settings are as follows: Time settings: (1) Rotate the Wheel to choose to set up for Time or Date. (2) Press the Wheel to select. (3) Press C to go back to the previous setting section, for example, from minute back to hour setting.
Settings 4.3 Advanced Setup The IP Radio provides more detailed settings for you to adjust according to your preferences. Press Menu on the device to access this menu. 4.3.1 Language The IP Radio supports different languages. Select your preferred display language on the device. (1) Rotate the Wheel to choose the desired language. (2) Press the Wheel to activate the setting. 4.3.
Settings 4.3.3 Clock This section allows you to set up Clock settings. Set Manually: (1) Rotate the Wheel to choose Hours and Minutes on the Set Time page. (2) Press the Wheel to bring up the Set Date page. (3) Rotate the Wheel to choose the date. Auto Sync(NTP): (1) Rotate the Wheel to choose whether to set the clock synchronize automatically with your IP Radio . Please confirm that you have the correct time zone set (refer to Time Zone section for settings). (2) Press the Wheel to activate the setting.
Settings 4.3.6 Demo Mode This section allows you to set the Demo Mode to On or Off. Rotate the Wheel to choose, and then press the Wheel to select an option. Note: Refer to Getting Started chapter for Demo Mode details.
Settings 4.4 ECO Config In this menu, you can select energy saving related (ECO) settings for your IP Radio. Press Menu on the device to access this menu. 4.4.1 Backlight This section allows you to adjust the backlight duration time for your device. (1) Rotate the Wheel to choose a duration time period for the backlight. (2) Press the Wheel to activate. 4.4.2 Brightness This section allows you to adjust the LCD Brightness based on your needs for best viewing.
Settings 4.4.3 Volume limitation If you select volume limitation to On, when you adjust the volume, it will not increase till the loudest but to a certain volume limit. This helps to prevent a sudden loud sound. Rotate the Wheel to choose On or Off and press the Wheel to activate. 4.5 Network config As mentioned in the chapter Turning On The Device For The First Time, the device will automatically connect to the set network each time the device is turned on.
Settings 4.5.3 Edit Config This section allows you to adjust your network settings manually. Rotate the Wheel to select Edit config. You will be asked to choose whether to enable auto DHCP or not. DHCP allows the network connection to establish itself automatically each time you use your IP Radio. When you choose YES, the device will start to find a gateway automatically. When you choose NO, you will need to setup the network according to your needs.
Settings After setting up the network manually, you will be asked “Auto (DHCP)?” again. Rotate the Wheel to select No, and then press the Wheel to activate the new settings.
Appendix 5. Appendix 5.1 Care and Maintenance Turn off your IP Radio. Use a smooth and dry cloth to wipe. Do not use a rough cloth, powerful liquid cleaners, thinner painting, alcohol nor other solvents to clean. These products can damage your IP Radio. 5.2 Problems Refer to the table presented below in case of an operational malfunction: Problems Remedies The Remote Control does • Confirm that the batteries are correctly not function. installed.
Appendix Access denied to the Internet Access denied to the Radio from a personal computer as an access point (Media Server). The alarm does not ring. Confirm the WiFi router, Livebox or the line connections. Check that your Radio is not encoded or you must have the encoding key to access. Check that the alarm source is configured well (for example: the mp3 player is disconnected,...). Problem of the connection to • No DHCP server enabled. Please confirm the router. router settings.
Appendix In case of non receiving on the Internet, refer to the table here under: What has been done with success The IP Radio is booted normally. BUT NO SIGNAL BAR ON THE SCREEN. What could be the trouble ? The IP Radio does not obtain an IP address. 1. No DHCP server enabled. Please confirm the setting of your router. 2. Incorrect WiFi encryption key is entered. Please double confirm the key and re-enter. 3. The network interface has difficulty. 1. The network interface of the IP 1 .
Specifications 6. Specifications Dimensions Unit Weight CPU Memory Front Panel Display Remote Control Audio Jack USB Port Input Power Hardware and Port Characteristic 31(H) x 200(W) x 69(T)mm 470gm 128MB NAND flash embedded 32MB SDRAM embedded 128x64 Graphic-based & Back-lighted LCD IR function remote control 2x 3.
Environment 7. Environment 7.1 Packaging Preservation of the environment is an essential concern of SAGEMCOM. The desire of SAGEMCOM is to operate systems observing the environment and consequently it has decided to integrate environmental performances in the life cycle of its products, from manufacturing to commissioning, use and elimination. 7.
