Operation Manual

D27T
- 7 -
2. The envelope icon disappears when there are no more new messages.
Note !
Your voicemail number is not set in the factory, you can set the number using the
key .
To proceed, turn to paragraph 5.5 page 9.
4.1.12. Temporary tone
In pulse dialling, you can use temporary tone dialling to temporarily access touch-tone service
offered by banks.
1. Press the
key after call is answered.
2. Press the number key and follow the voice instructions.
3. After you hang up, the phone automatically returns to dial pulse (rotary) service.
4.1.13. Paging the handset
To locate a misplaced handset:
Press the key at the base station, "paging " flashes on the screen of the handsets registered
on your D27T base station until you press a handset key or until you press
on the base station
again.
4.2. Calling line identification presentation (CLIP)
This CLIP phone stores and displays CLIP information provided by your local telephone company.
You must subscribe to CLIP service in order to use this unit.
If you have not subscribed to CLIP service or if the caller number is suppressed, the display
shows “unknown”.
4.2.1. Caller list
CLIP of incoming Call are stored in the CALLER LIST menu.
When you enter the CALLER LIST menu, the display will show icon
.
Caller List stores the last 10 incoming calls and call time.
4.2.2. Display of numbers not available
Unavailable :
you are not in same area as your contact.
withhold id :
your contact does not want their number to be displayed.
4.2.3. Accessing the caller list menu
1. Press the key to enter the Caller List menu. The display shows the recent caller phone
number (up to 12 digits).
2. Press the or key through the caller List.
4.2.4. Calling back a caller
1. Press the key to enter the caller list menu.
2. Press the or key to select a call record.
3. Press the
key to dial the number.
4.2.5. Deleting caller list record
1. Press the key to enter the caller list menu.
2. Press the or key to select a call record.
3. Press menu key.
- Select "delete " to delete the current record.
- Select "delete all" to delete the entire Caller list.