Operation Manual

D27T
- 9 -
5.4. Deleting a memory / the whole phonebook
1. Press menu, "phonebook " appears on the screen. Press menu.
2. Using the or key, select "delete ". Press menu.
The list of phonebook entries organised in alphabetical order appears. Select the entry you
want to delete using or .
3. A confirmation screen appears.
- If you do not wish to delete the entry, press
.
- To delete the entry, press menu key.
The entry is deleted from the phonebook. You will hear a confirmation tone.
Note !
If you enter the wrong digits press key to delete the incorrect digits.
Note !
To delete the entire phonebook list, select " delete all ", press menu.
A confirmation screen appears:
- If you do not wish to delete the entry, press
.
- To delete the entry, press menu key.
The entire phonebook are deleted.
You will hear a confirmation tone.
5.5. Assign a shortcut
This menu allows you to record two quick dial numbers assigned to the keys 1 and 2 on the
keyboard.
Note !
Your voice mail number is not factory set and you can assign it to the key .
Please Contact your telephony operator in order to obtain the appropriate voicemail
number.
1. Press menu, "phonebook " appears on the screen. Press menu.
2. Using the or  key, select "direct mem.". Press menu.
3. Using the  or  keys, select the key you want to assign a number (1 or 2) to and press
menu, "no number " is displayed on the screen. Press menu.
4. "edit Number " appears on the screen, Press menu.
5. You will then enter the name input screen. Enter the name of the entry and press menu to
confirm.
6. You will then enter the number screen. Enter the number of the entry. Press menu to
confirm. You will hear a confirmation tone.
5.5.1. Calling an abbreviated number
To call the number you have assigned to one of the shortcut keys:
1. Hold down the key on which the number was programmed (1 or 2).
2. The number is displayed on the screen and is automatically dialled.
5.6. Inserting a pause
You can insert a pause in the dialling sequence. Wait for a dial tone before you press menu. The
pause time is fixed to 3 seconds.
Press and hold
key during edit mode to inset the pause. The display shows an ’’P’’.