Operation Manual

D27T
- 11 -
Making a second call while you already on line
During a conversation, press then dial the number to be called.
The call in process is then put on hold and you can take the second call back.
Switching from one call to the other
To switch from one call to the other, press then the key .
The call in process is then put on hold and you can take the second call back.
Ending one of the two calls
To end one call and continue with the other, press then the key .
The call in process is then ended finally and you take the second call back.
To set up a 3-way conference (the 2 calls and yourself)
During a conversation, press then the key .
You can then talk with the 2 contacts at the same time.
To end the 3-way conference, press the red key
.
7. Customising the handset
7.1.
Handset naming
This function allows you to change the name of your handset.
1. Press menu, select "personal set " using the or key, Press menu.
2. "handset name " appears on the screen. Press menu.
- Use the keypad to enter the new name (up to 10 characters).
- Use
key to delete wrong input if necessary.
3. Press menu key to confirm your selection. You will hear a confirmation tone
7.2. Tone settings
7.2.1. Handset ringer level
You can choose from four ringer volumes.
1. Press menu, select "personal set " using the or key, Press menu.
2. Using the or key, select "handset tone " Press menu.
3. "ring volume " appears on the screen. Press menu.
4. Use or to select the volume level.
5. Press menu key to confirm your selection.
7.2.2. Handset ringer melody
This function allows you to assign a ring tone for incoming calls.
1. Press menu, select "personal set " using the or key, Press menu.
2. Using the or key, select "handset tone " Press menu.
3. Using the or key, select "ring tones " Press menu.
4. Use or to select the ring tone.
5. Press menu key to confirm your selection.
7.2.3. Key tone On/Off
This function allows you to activate or deactivate tones being heard when pressing the keypad.
1. Press menu, select "personal set " using the or key. Press menu.
2. Using the or key, select "handset tone ". Press menu.
3. Using the or key, select "key beep ". Press menu.
4. Use or to select "ON " or "off " setting.
5. Press menu key to confirm your selection.