Operation Manual

D27T
- 13 -
8.2.2. Date format
This function allows you to define the date format (JJ/MM ou MM/JJ).
1. Press menu, select "clock&alarm " using the or key, Press menu.
2. Using the or key, select "set format ". Press menu.
3. Using the or key, select "date format ". Press menu.
4. Use or to select format.
5. Press menu key to confirm your selection. You will hear a confirmation tone.
8.3. Alarm clock
To set the date and time:
1. Press menu, select "clock&alarm " using the or key, Press menu.
2. Using the or key, select "alarm ". Press menu.
3. To activate the alarm once, select "on once ".
4. To repeat the alarm each day at the programmed time, select "on daily ".
5. To deactivate the alarm, select "off ".
6. Select your choice then press menu:
Use the touch tone pad to enter the current alarm time. Enter minutes first (format is
HH:MM).
(If, after entering the time, the time format is 12H, use the  key to set
aM
and the key to
set
pM
).
7. Press menu key to confirm your selection. You will hear a confirmation tone.
8.4. Modifying alarm tone
1. Press menu, select "clock&alarm " using the or key, Press menu.
2. Using the or key, select "alarm tone ". Press menu.
3 melodies are available: "melody 1 ", "melody 2 " and "melody 3 ".
3. Select the desired melody.
4. Press menu key to confirm your selection. You will hear a confirmation tone.
9. Advanced settings
9.1.
Base master PIN code
Your base station code (default setting 0000) is required to access certain security functions. This
code can include 8 digits.
1. Press menu.
Select "advanced set" using the  or  key, press menu.
2. "change pin " appears on the screen. Press menu.
The base station code entry screen is displayed.
3. Enter your old code first. Each time a digit is entered the «_» is replaced by a «*».
Press menu to confirm.
4. Enter your new PIN code. Each time a digit is entered the «_» is replaced by a «*».
5. Press menu key to confirm your selection. You will hear a confirmation tone.
Note !
Carefully note your base station code. You will need it to change certain settings.
9.2. Association handset & base
This function allows you to register a new handset on your base.
1. Press menu. Select "advanced set " using the or key, press menu.
2. Using the or key, select "registration ". Press menu.
3. Enter the 4 digit base master PIN code (default 0000). Each time a digit is entered the «_»
is replaced by a «*».