Operation Manual

Setting up...
27
3 Select the handset to unpair from the base and validate with .
When you reset your handset, all the settings are returned to their initial values (factory settings),
except for the phonebook.
1 Go to the menu Settings > Handset > Reset Handset.
2 Enter the base code and validate with .
3 Press to confirm.
The base
You enable the pairing mode when you associate an additional handset.
Give a long press on the key on the base.
The base indicator light flashes *: the base is in pairing mode.
* D770A only
1 Go to the menu Settings > Base > Change PIN.
2 Enter the current code and validate with .
3 Enter the new code and validate with .
4 Re-enter the new code and validate with .
When you reset your base, all the settings are returned to their initial values (factory settings),
except for the phonebook.
1 Go to the menu Settings > Base > Reset Base.
2 Enter the base code and validate with .
3 Press to confirm.
Resetting the handset
Enabling the pairing mode
Changing the default code
Resetting the base
Your base will remain in pairing mode for about 1 minute.