User Guide

Sagemcom F@st 5260
Chapter 2: Getting Started
18
Blocking Web Sites
1. Under Site Blocking, click on Add Sites button.
2. Type or copy/paste website address you wish to block.
3. Click Add.
4. Click Ok.
How to set up your guest network
Provide guests with Internet access while limiting their access
to local resources by setting up a separate guest wireless
network.
1. Log in to the Web GUI.
2. Select the network (2.4 GHz or 5 GHz) in which you
wish to configure Guest network access. For the
convenience of guests, configure Guest network
access on both WiFi networks.
3. Under General tab, scroll down to Guest WiFi network
section.
4. Under Enable, slide tab from "Off" to "On".
5. Enter desired guest network name under then "Name
(Guest SSID)" field.
6. Enter guest network password under "Passphrase"
field.
7. Leave "Allow Local Network Access" at "Off" mode.
8. Click Ok.
NOTE:
Entering a site on the blocked sites list prohibits all
devices connected to your network from accessing
the site at all times of the day.