User Guide

Sagemcom F@st 5260

Chapter 3: USB Sharing

If the printer was previously installed on this PC, then

the driver should appear in the list under the proper

manufacturer and printer name.

If your driver does not appear, you will need to locate

the correct driver and click Have Disk to install it.

6. (Optional). You can choose to set this printer as your

system Default Printer by selecting the checkbox next

to "Set as default printer". Click Next.

7. If everything is configured correctly, the Wizard will

display the message, "You have successfully

completed the Add Printer Wizard." Installation can be

verified using the "Print Test Page" button. Click Finish

to complete.

Configuring a Printer (MAC)

1. In the "Print & Fax" dialog, click + to add a printer.

2. Click the IP tab.

 Change the protocol to IPP.

 Set address to http://192.168.1.1:631/IPP

 Set Queue name to (blank).

 Under Print Using, choose "Select a device

driver to use".

NOTE:

Check the bottom of the list for your manufacturer.

Printers are not always listed alphabetically.