User's Manual

ManualsBrandsSagemcom ManualsComputers & AccessoriesBroadband Wireless Gateway

Table Of Contents

CE Mark Declaration of Conformance and Restrictions for Euro

Safety and Certifications

007-9062-001 1

Important Information about the Gigaset SE 567, Gigaset SE 568:

Installation and Safe Usage Instructions:

1. Place the Gigaset ADSL gateway in an upright horizontal orientation on a flat surface.

2. Connect the manufacturer supplied AC to DC power adapter. The Gigaset SE567/568

series gateways require the use of a 12 VDC, 1 A power adapter. Only use a manufacturer

supplied and approved power adapter.

3. Connect the Ethernet cable (provided) to the RJ45 port on the Gigaset ADSL Gateway

labeled "Ethernet". Then connect the other end of the Ethernet Cable then to the Ethernet

port of a computer. Repeat as necessary for the available Ethernet ports.

4. If a USB port is available, connect the “B” end of the provided USB cable to the port on

the Gigaset ADSL Gateway labeled "USB". Then connect the “A” end of the USB Cable to

the USB host port of a computer.

5. Connect the provided DSL Cable to the port on the Gigaset ADSL Gateway labeled

"DSL". Connect the other end of the DSL Cable to a standard Phone Jack. Always use a

DSL cable with a minimum wire gauge of 26AWG (0.4 mm dia., or 0.129 mm

²)

6. If using a USB port, use the Gigaset CD to configure the computer’s USB connection.

When using this device, basic safety precautions should always be followed to reduce the

risk of fire, electric shock, and injury to persons including the following:

1. Do not use this product near water and avoid contact with moisture. For example, do not

use near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a

swimming pool. Care should be taken so that liquids are not spilled on this equipment.

2. Never insert objects into the vents of this equipment as this can result in the risk of

electrical shock or fire.

3. This equipment should only be operated from the type of power supply indicated on the

marking label.

4. Do not overload wall outlets or extension cords. Doing so can result in the risk of fire or

electrical shock.

5. Avoid blocking any vent openings or exhaust exits on this equipment. Do not place

equipment in a built-in installation such as a cabinet that may impede the flow of air through

the ventilation openings.

6. The equipment should be situated away from heat sources such as radiators, heat

registers, stoves, or other heat producing appliances and equipment.

7. Care should be taken to ensure that the power cord is routed, so it is not likely to be

walked on or pinched by items placed upon or next to it.

8. Unplug this equipment before cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning only.

9. This equipment is not user serviceable and is to be serviced by qualified personnel only.

Do not disassemble this equipment. If service is required, disconnect all power and phones

lines from the equipment and consult qualified service personnel.

Save these Instructions!

Federal Communications Commission (FCC) Statements

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

Summary of content (4 pages)

PAGE 1
Safety and Certifications Important Information about the Gigaset SE 567, Gigaset SE 568: Installation and Safe Usage Instructions: 1. Place the Gigaset ADSL gateway in an upright horizontal orientation on a flat surface. 2. Connect the manufacturer supplied AC to DC power adapter. The Gigaset SE567/568 series gateways require the use of a 12 VDC, 1 A power adapter. Only use a manufacturer supplied and approved power adapter. 3.
PAGE 2
Safety and Certifications Modifications: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC Responsible Party: Siemens Subscriber Networks, Inc. 4849 Alpha Road Dallas, TX 75244 Phone: 972-852-1000 Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 3
Safety and Certifications Slovene Lithuanian Latvian Šiuo Siemens Subscriber Networks, Inc. deklaruoja, kad šis Broadband ADSL Modem atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Šiuo Siemens Subscriber Networks, Inc. deklaruoja, kad šis Broadband ADSL Modem atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Ar šo Siemens Subscriber Networks, Inc.
PAGE 4
Safety and Certifications situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.