Quick Start Guide



Before you begin,

Verify that the following items came with your DSL kit:

1 SpeedStream

Device

2 Documentation

3 Software Manual CD-ROM

Power Supply

RJ-45 Straight-through

Ethernet Cable

6 RJ-11 DSL Cable

Your service provider may include a wall-mount lter, line lter(s), and an Ethernet

adapter in your DSL kit. If you received any of these items, follow the instructions

provided in this guide for basic installation. If you need further assistance installing

these items, please contact your service provider.

A PCI Ethernet adapter

B Line lter(s)

C Wall-mount lter

Step 1

Install Line Filters

Stand-alone Line Filter

Wall-mount Filter

Devices such as fax machines, caller

ID boxes, or phones that share

the same phone line as your DSL

account require a line lter, which

prevents noise from disrupting the

DSL signal on the phone line. Filters

can be in the form of a stand-alone

line lter or a wall-mount lter.

Stand-alone Line Filter

For each device that shares the

DSL phone line:

1. Unplug the device’s cord from

the phone jack.

2. Plug the lter into the

phone jack.

3. Plug the phone cord (or other

device cord) into the lter.

Wall-mount Filter

For a wall-mount phone, install a

wall-mount lter.

1. Remove the phone.

2. Connect the wall-mount lter

to the wall plate.

3. Reconnect the phone.