Operation Manual

RTI90-320/500 T2 HD UK
46
• Recording Type: By default, the receiver records programmes based on their announced time. This
recording mode is identified as programme type.
You can programme recording margins which will be automatically added to the recordings carried
out via the electronic programme guide. You can thus set the receiver so that it starts to record a
programme before its announced start time, and stops after its announced end time.
To activate this feature:
• Just set the recording type to Timer.
• Select the desired starting and ending times (0,1,2,5, 10 or 15 minutes).
• Sleep Timer: you can set the receiver to automatically switch to standby mode at a specific time.
If you activate this feature:
• In Sleep Timer field, select Active.
• Set the desired Sleep Time in 24H format (HH:MM).
Receiver Locking and Parental control options
1. Go to User settings > Locking.
2. Define the parameters as follows:
Receiver locking
You can lock access to the receiver. If you activate
the receiver lock, you will need to enter the parental
code every time you switch the receiver on, or want
to access the receiver menus (Receiver settings,
Channels, etc.).
Channel locking
You can lock access to specific channels. If you
activate the channel lock, you will need to enter the
parental code every time you switch to a locked
channel.
To set the list of channels you want to lock, select
Channels to lock and press the [Locking] key.
You can then select/unselect the channels of your
choice by pressing the [Locking] key.
Hiding Adult channels
This feature lets you hide adult genre channels. If you activate this feature, all adult genre channels will
be hidden: you will not be able to switch to an adult genre channel, or browse this category in the
electronic programme guide.
Use this feature to protect your children from this type of exposure.
Note
In Timer mode, the series recording function is not available.
LU 253335051-B RTI90-320_500 T2 HD UK.book Page 46 Jeudi, 13. octobre 2011 2:50 14