Operation Manual

RTI95 T2 HD UK
Getting started
21
Press the key to validate then key to continue.
Channel Search
10.The recorder automatically searches for available
FREEVIEW TV and radio channels.
Press the key to save the channels found.
Selecting your region
11.Select your region.
12.Select [Save] and press the key to confirm.
You recorder is now set. You can start watching and enjoying all your FREEVIEW channels.
Should any problem that prevents you from completing the installation arise, please contact your
retailer or the Sagemcom Hotline.
UK Hotline: [phone]
Note
The parental code is used to lock access to the recorder and channels. Make
sure you remember it for future use. You can change the code at any time (see
Changing your Parental code, page 38).
Note
If the recorder cannot find any channels, you will be asked to adjust the
antenna. The reception strength and quality of the antenna signal are
displayed. Check the antenna cable connections.
When the signal level is satisfactory, press the key to resume the
installation.
I
f the level and quality of reception remain insufficient, contact your antenna installer.
Note
If you use an indoor antenna with an amplifier, it is possible to power the
antenna from the recorder (+5VDC, 50mA).
In the Power Settings menu, set Aerial Power Amplification to Yes (see
Setting the power parameters, page 40).
LU 253463441-A RTI95 T2 HD UK.book Page 21 Mercredi, 1. février 2012 10:59 10